Stephen Odgaard

Problem resolved. It seems the Sonic Studio Virtual Mixer was causing a routing problem. After disabling this in the Device Manager, and rebooting all works as it should.

Hi all, I have a new PC setup and vPilot running with MSFS. Both Microphone and Output device have been configured in vPilot. I can send voice and be heard by ATC and other pilots. the Tx indicator lights up as it should. I can send and receive Text messages. I can hear ATIS (which is a bunch of Wav files locally) But I can not hear ATC and other pilots. The Rx button does NOT light up. Obviously the problem can be several places: Router/Firewall - all blocking rules are set to off Microsoft Defender F

Dont think so- it seem to catch switches which are in the on- state... They were both on my Thurstmaster Warthog HOTAS Throttle. But after third or fourth attempt it disregarded them... /Stephen

The above is infact the problem - selection of a key that was not constantly on. By pressing the "Set new PTT" a number of times i managed to get it to scan for other switches which were not pressed and subsequently select the correct. Looks nice v 2 /Stephen

Hmm. Seems the problem is actually a different. That it has cought a joystick switch which is on, rather than the one I thought I had selected... Now the question is then how to byp[Mod - Happy Thoughts] that selection, and get vPilot to identify the key which experiences a state change after the PTT button selection process is started.

Hi Ross, Previously in v1 I was able to have my PTT configured via Traffic Proxy on the Sim PC, and The transmit button down/up send to the remote vPilot PC w Voice. This does not seem to function in the Host + Remote_w_Voice setup. I have configured a PTT on the Host PC as a joystick button. Any ideas? /Stephen

Hi all, I run ES with two screens on PC 1. and a third on PC 2. The main is running on PC1. All works fine there. The 2. on PC1 and 3. PC2 are connected via the proxy server. On 3. window (on PC 2) I am not able to set temporary alt, speed or heading. Doing it on the main screen works fine. Anyone else experience this? Any way to avoid this problem? /Stephen

Hi, Suggesting coordination change to the previous controller works fine. But suggesting a change to the next controller does not work. Is this a known issue? Thanks /Stephen

Got a link for the info: http://www.forum.aerosoft.com/index.php?/topic/80210-Queenstown-RNP-Procedures /Stephen

Hi Mark, Thanks, I am mainly a P3Dv2 pilot flying JeeHells FMGS A320-214. I browsed the AIP - where I found the procedures, but not the coordinates [Mod - Happy Thoughts]ociated with the FIXes. Would you happen to have a link to where the coordinates are defined? The Navdata AIRAC being for simulation purposes, could the FIXes and procedures not be defined there ? Such a beautifull approach procedure. Flew it approximately to a 23 approach with ORBX new NZ south island. /Stephen

Hi, I did a flight tonight NZAA-NZQN. I downloaded the RNAV Y (05 & 23). In the lastest AIRAC from Navdata Pro it seems that all the approach points and procedures are missing. STARS are ok, but not after ATKIL and IBABU. Further I cant seem to locate the coordinates for all the points QN577 etc. Can anyone direct me? Thanks Stephen

Thanks for the info!

Thanks. I seem to have FSInn freeze at click of CP after correcting the chat window issue. I can also read about an unresolved issue on the migration tool support forum. However running it outside P3D in legacy mode seems to work fine.

Any drawbacks to running P3D in legacy mode, like issues with true P3D addons? /Stephen

Where do you change the powermanagement of the joystick by the way?