Jump to content

Emiliano Ferraco

  • Content Count

  • Joined

  • Last visited

Everything posted by Emiliano Ferraco

  1. Any chance to have a version before Cross the Pond? is a good opportunity to test it
  2. Hello, There are lot of countries that, because of their lenght, have got different values of magnetic declination between north and south sectors, and sometimes this contrast affects a lot when controlling. I know that there is only one value for magnetic declination in.sct file, but I was wondering if is there anyway to change it ..., for example, something like a batch file that allows to change it before starting ES, with a little menu with four or five different values to select, depending on the position we are going to control. I read that something like this is someway eas
  3. Thank you Abdelrahman, the .sline command was very usefull !
  4. Place the AF2SCT and the AFCAD file in the same directory (for example c:\af2sct). Then go to the CMD line, and type the directory path. When you are done, type in the command line: af2sct af2_ICAO.bgl 3. You will get some .sct and .ese files.... thats all...
  5. Look for a tool called "AF2SCT" (in russian forums). With it, you can use an AFCAD file, and convert it into .sct and .ese
  6. Hi, I´ve a new doubt now: If in a FIR COPX the LOA establishes that at a designed fix, to transfer the flight, it is require a minimun FL (for example FL250 as min), but not an specific FL, how can I define that COPX? Just guessing, perhaps I should define two FIR_COPX, one for the event the aircraft is below the min. (defining a climbing constraint) , and other in case the aircraft is above that min. (in this case, without any constraint)...
  7. uFFF.... come on! nobody told me that order matters in .ese files. I defined one sector which border includes one sectorline that is defined below the sector. There was the error...
  8. I´m going crazy!.. cant find the error...
  9. Is there any app or any way to debbug a .ese file? Euro is pointing me a mistake in a line, but I´ve followed all the sectorlines and sectors involved, and I cant find the error yet
  10. Hi, I have some doubts about COPX Take a look a this one: COPX:*:*:PADAS:*:*:EZE-RADAR:EZE-FIR:*:*:PADAS 1º.- Are coordinations points reciprocal? In the example, coordination points works fine much as for precedings planes from EZE-RADAR and from EZE-FIR? or should I define COP in both ways EZE-RADAR:EZE-FIR and EZE-FIR:EZE-RADAR? 2º.-Are FIR COP used for Firs boundaries between firs that belongs to the same country? or they are just used in an international boundary? 3º.- When a fix corresponds to both, a FIR_1 and a TMA_1 boundary, should I define a COP in that fix bet
  11. Sure This is SABE_TWR owned sector... This one is with SABETWR and BAIRES_TMA "online" The blue lines belongs to the ARTCC section of the .sct2 file. I dont know if has something to do with it, but I light up the sectors selecting them from the display settings dialog, just for testing purposes.
  12. I mean, when the sector "lights up", when you log in to control a defined sector and it belongs to you...
  13. Hi, Here are two images: the first one belongs to SABE airport, with no sector active in the background. The second one is the same airport, but when I activate the sector, all [REGIONS] dissapear. Why is that?
  14. Hi, I´m trying to contact Sami Ylismäki, UNIATIS admin. I Sent him an email and posted some messages in his forum, but without luck. Anyone know him, or if he has a new email? I need a login username and p[Mod - Happy Thoughts] for UNIATIS web. Thx
  15. 7333 It´s default value from Goldwave. Anyway... I tried first with Audicity, with bad results, and very poor audio quality. Now Goldwave seems to work better. I type custom rate to 7350 and use the batch converter, and it worked. I had had some trouble before with the files that were created with TextAloud. There was my problem. So I´m using another TTS now. 1. I take this opportunity to ask: is there any guide or manual to customize uniatis url, to obtain exactly the information i want, and in the order I need? I read ES Guide, and any information I found in Uniatis web page, but I s
  16. 8000 hz and 7333 hz is just the same for ES? I saw in an older post that someone has converted his files to 8100 hz and they worked fine...
  17. Ok.. I´ve created the audio files with TextAloud. Then, converted them to 7333 hz 16 bit mono .wav with Goldwave. I also create the atis.txt with the names of the files: RECORD:0:voice_001.wav RECORD:1:voice_002.wav etc. Run ES, selected the ATIS dialog, selected the .txt... but no matter what i do, there´s always the same message "unable to open ... voice_002.wav file". I also tried converting the files to 8000hz. Strange thing here is that, recording sounds with windows recorder, and then converting it with goldwave in the same way done before, everything is fine, and ES p
  18. Sorry, nevermind. I´ve just searched into the forum and found two: audacity and goldwave.
  19. Hi, I´m finishing my ATIS voice pack, but I cant find a 7.35 khz audio converter. The ones I´ve found can manage wav files till 8000 hz. Any one know a good one? ... and I´m not an expert in this kind of issues, so any advice would be apreciated. Thanks
  20. Thanks Todor. And thanks George, that link was very usefull!
  • Create New...