Jump to content

Masaki Hasuike

  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. A lot of airspaces and airports are being amended in Japan. To minimise the confusion caused by the version difference of the NavData between each pilot, pilots flying in VATJPN airspace shall note following. ・Pilots shall indicate the AIRAC cycle by putting “AIRACxxxx” on the beginning of the remarks column of the Fight Plan. Note that in the strip bay on the VRC, the display of the Remarks column is significantly restricted. Be especially careful if you use the flight plan generation add-on. Pilots should try to update their AIRAC to the latest
  2. At AIRAC 1908 on July 18, 2019, SID and STAR of Tokyo International Airport (RJTT) and Narita International Airport (RJAA) have been changed significantly, and the surrounding airways have also been changed. For the time being, new and old navigation data are mixed, which may cause confusion. Please note the following about each virtual pilot flying to Tokyo and Narita airport. [Effective] 2019/07/17 15:00Z (2019/07/18 00:00JST) for 6 months [For pilots] ・Indicate AIRAC number at the beginning of the Flight Plan Remarks column. Please enter AIRACxxxx at the beginning of the remar
  3. Dear VATSIM members. I am Masaki Hasuike, VATJPN1. Today, I inform you about new vAcc operation of VATJPN. The operation of Kobe control will begin on October 1, 2018 in Japan time, and the operation of Naha control ends. Due to this, call sign and 4 letter code will be changed to the below. -- Kobe vACC opening date & time -- 1500 UTC, 30th, September, 2018. 0000 JST, 1st , October, 2018. -- Before change -- 4 letter code: RORG_CTR Call sign: Naha control -- After change -- 4 Letter code: RJBG_CTR Call sign: Kobe control There is no change in frequency a
  4. VATJPN and VATKOR would like to invite you to our "Fukuoka Meets Incheon". The route has become increasingly popular in the real world. Since it takes only an hour and a half for one-way, you can fly a round trip within the event time. We are looking forward to seeing you on the scope! --- Date & Time --- Saturday, March 10, 2018 1200-1600z --- Airports --- Fukuoka Airport (RJFF) Incheon International Airport (RKSI) --- Routes --- RJFF - RKSI : DGC G339 INVOK Z91 PSN Y782 BITUX Z53 BASEM Y685 GUKDO SID : HAKATA 3 DEPARTURE(HAKAT3) for RNAV1 FUKUOKA 2 DEPART
  5. Hello Zidong, Thank you for posting. I will relay to your message to the controller. He is S2 trainee. Please fly again for his training. Masaki Hasuike / 1141450 / VATJPN1
  6. Dear Andreas, Thank you for your suggestion. I will forward it to our web team
  7. We made a new VATJPN logo. Please check it out ! http://vatjpn.org/resource/images/logo/banner60.png Masaki Hasuike / 1141450 / VATJPN1
  8. I'm honored that ROAH, RJFU and RJCC are included in World Flight 2014. VATJPN propose the following flight plans. I'm looking forward to seeing you in Japan. Masaki Hasuike / 1141450 / VATJPN1 ------------- PGUM - ROAH UNZ R595 MJC V91 CORAL STAR : CORAL NORTH ARRIVAL for RWY18 CORAL SOUTH ARRIVAL for RWY36 IAP : RNAV RWY18 ILS RWY36 ROAH - RJFU ALC Y25 BOMAP Y45 HKC DCT HONDO DCT OLE SID : SARTA 1 RNAV DEP. AMAMI Trs. from RWY18 EISAR 1 RNAV DEP. YUGAF Trs. from RWY36 STAR : There is no STAR for this flight plan. Radar vector to KOHNO for RNAV RWY14 a
  9. I would like to thank everyone who was involved to select the VATJPN1. I am looking forward to cooperating with you. Masaki Hasuike / 1141450 / VATJPN1
  10. tried pinging "sweatbox.vatsim.net" and "www.vatsim.net" this is the result. ------------ Pinging sweatbox.vatsim.net [] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Pinging http://www.vatsim.net [] with 32 bytes of data: Reply from bytes=32 time=260ms TTL=44 Reply from bytes=32 time=263ms TTL=44 Reply from bytes=32 time=270ms TTL=44 Reply from byt
  11. Winsock Error (10060) I've been using TWRTrainer without problem for few years as training manager of VATJPN.(windows 7, 64bit, SP1) But tonight, when I open the *.air file, winsock 10060 error occurred. Another member of my team tried to open the *.air file, it gave the same error. (We can connect to the sweatbox using VRC.) TWRTrainer throws this error : "The following winsock error occurred with index 0: (10060) The attempt to connect timed out" Followings are what I have tried (but doesnt work). 1 : checked my CID and p[Mod - Happy Thoughts]word 2 : connecting server -&
  • Create New...