Jump to content

Daniel Dezulier

Members
  • Content Count

    45
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. We need a tool which is able to indicate not only on the map but also on airport local map where are connected aircraft prior to chose our own stand. For the moment we are able to see flying aircraft, but not the boarding or arriving ones. Something which looks like flightradar24.com ...
  2. This point out that we need a tool which is able to indicate not only on the map but also on airport map where are connected aircraft prior to chose our own stand. For the moment we are able to see flying aircraft, but not the boarding or arriving ones. Something which looks like flightradar24.com ...
  3. Hello, since this morning impossible to see flight on Vattastic. I can connect on client (tested XSB and xPilot) I can log in Vattastic as an individual I can logon into Vatsim, via xPilot When I login on these different places Then a message ask me to be logged either on Vattastic (I am) and on VATSIM as a plane (I am too). What I missed ? Thank You !
  4. .rx com1 ON/OFF => works . rx com2 ON => works / OFF => do not work .tx com x switch on, unable to switch it off when these things will be fixed ?
  5. On the flight FCPP-FKKD at TOD, arrival and approach, auto-unicom announces contained "...inbound from the North..." despite flight was incoming from South. I did not check East/West yet...
  6. Yes, 200 % approved ! This version, tested against consuming scenery and demanding aircraft, works fine ! Well done Justin !
  7. Just know that P3D does not seem to be continued. less than 26000 airports, X-Plane is preparing its graphic evolution with Vulkan to replace OpenGL. As it is an open community, there are more than 38k airports available and more than 28k with 3D objects. ...
  8. Hello Justin, Many thanks for this upgrade ! I guess it'll be well received by all simmers. Best regards Daniel
  9. A reminder Tool is at you disposal here https://forums.x-plane.org/index.php?/files/file/57200-check_fpslua/
  10. Sorry I missed your post https://forums.x-plane.org/index.php?/files/file/57200-check_fpslua/
  11. Hello, I wrote a Lua script to figure out how FPS varies and to count variation and display them. It also computes and count FPS drops under 20FPS that last for more than 30 seconds. xPilot displays at which time your sim begin to slow under limit and at which time it recovers. You ll may compare with this third party script and report to xPilot developer if needed. Hope it'll help. I use 3jFPS Wizzard in conjunction, which help proving the right calculation in my script and will help to confirm that sometimes there are abnormal disconnection, and I hope, help its developer to fix its code
  12. And why aren't these people listen to ? Why ? I was one of that people with quality slider on the right and FPS average between 35 and 60, depending on the scenery, and being disconnected. I wrote the script which points out the monitor was much sharper than it would be. But it seems there are some deaf people hiding themselves behind the cause the invoke. It is like a crusade, we are renegate, and they are knights, we are wrong they are right. Whatever your flying experience. And the fact I have evidence in front of my eyes doesn't matter and don't stop them as they just listen to t
  13. Thank you for the link to XSquawkbox Knowledge base. 20FPS means 50ms (50ms*20 = 1s) If, during the elapsed 1s, FPS is down to 10FPS one time, there will be 100ms with a low frame rate and 900ms with a normal rate. So a short freeze. If it happens rarely it is OK.The FPS average is <20FPS, strictly. if, during several consecutive seconds(2,3,10,30) , FPS drop under 20FPS, then during the elapsed time (2,3, 10, 30 s) the average speed will be < 20FPS. And for sure the real position of the aircraft will differ from the one it should be. The plane is slower than indicated. It
  14. While checking xPilot 1.1.9.1, 3jFPS.lua and CheckFPS.lua with and average speed rate of 53 and a rate of low rate of 1/1000, I observed a warning -not a disconnection- during tile loading. By the way I do not see the transparent windows with frame rate. Where it is supposed to be ? My script record automatically lasting drops <20FPS for 30 s and count them. xPilot warned me for a one minute lasting 19:14:36 - 19:15:39 which hasn't been detected. So there is a discrepancy between xPilot detection, and Check_FPS.lua detection. To find out I modified the script, allowing to increase
×
×
  • Create New...