Jump to content

You're browsing the 2004-2023 VATSIM Forums archive. All content is preserved in a read-only fashion.
For the latest forum posts, please visit https://forum.vatsim.net.

Need to find something? Use the Google search below.

Patch for 3.1 is available


Gergely Csernak
 Share

Recommended Posts

Gergely Csernak
Posted
Posted

Hi all,

 

Since we realized that there is a bigger bug (taxi does not work in simulation) we knew that an immediate patch is required. Meanwhile we received many responses from you here in the forum. There were also some bugs and misused features indicated. Therefore we needed some more time to come out with the patch. But finally it is available for the community.

 

You can download the complete installer, or just download the modified files in a ZIP. For further information about links check EuroScope homepage: http://www.euroscope.hu.

 

The complete list of changes are available at http://www.euroscope.hu/install/changes.html. But here is a short list of the changes:

- Simulator TAXI and PUSHBACK instructions do not take off the plane.

- If no secondary radar readout then primary is not correlated anymore.

- New attribute in simulator scenario file. IASVARIATION: to define the IAS variation.

- The ASR simulation mode is changed to “Radar”, “Ground with S-mode radar” and “Ground without radar”. No separate “Professional” and “Easy” radar mode. The correlation mode in the general settings dialog decides if the radar display is professional or easy. In Easy correlation mode the simulation of radar antennas and holes are also disabled.

- Complete TAG dismiss bug is fixed.

- Easy ground mode is available.

- Mouse handling changed a bit. It selects the items at mouse down not only mouse up. And also the small (less than 5 pixels) movements are disabled.

 

The new release is 3.1d. Unfortunately the 3.1b and 3.1c did not p[Mod - Happy Thoughts] the beta testers examination .

 

I hope you will find it better, more reliable and more fun when controlling.

Gergely.

EuroScope developer

Link to comment
Share on other sites

Geir Grønlien 875065
Posted
Posted

Thank you for doing an excellent job Csernak.

 

Looking forward to try this patch...

Best regards

Geir Grønlien

http://www.hypoxiafilm.com

Link to comment
Share on other sites

Alexander Cohrs
Posted
Posted

Great news, thank you for the update!

gen.php?img=_5_1&cid=899395

Link to comment
Share on other sites

Achim Van Der Graaff 11420
Posted
Posted

Maybe a stupid question I downloaded all, it works but where can I find info how to use it when I am flying on FSinn/Vatsim//

 

[email protected]

Link to comment
Share on other sites

Todor Atanasov 878664
Posted
Posted

You can't. You can have only one active connection to VATSIM at any one time. Either flying with FSInn/Squawkbox or online with ATC client - EuroScope/VRC/ASRC.

 

You can use EuroScope + FSInn to have virtual Tower, you can find the info in the wiki => http://euroscope.hu/mediawiki/index.php?title=Tower_View

Link to comment
Share on other sites

Mark Jansen
Posted
Posted

Has anyone experienced problems with aircraft not popping up anymore after installing the 3.1d patch? There seem to be a 1-minute delay after connecting to the normal network before traffic and ATC pops up. In the simulator environment, simulated traffic does not appear at all. Any ideas?

 

Mark Jansen

 

UPDATE 1511 UTC: a fellow controller reported the same problem after installing the 3.1d patch. Something must be wrong.

Mark Jansen

Director Dutch VACC

http://www.dutchvacc.nl

Link to comment
Share on other sites

Todor Atanasov 878664
Posted
Posted

I can't reproduce. Can you both check that all your setting are loaded correctly: settings files, asr, scenery files, servers, files path. Also can you ping the server (with SI or some other program) you are connecting and getting 1 min delay. So far this is the first such reported problem.

Link to comment
Share on other sites

Jonas Eberle
Posted
Posted

CHeck that you set the radar mode again under "OTHER Set/Display settings". I realized the same - I was using Easy Mode before, should be set to "Radar" now in the .asr, "Easy" in General Settings.

Link to comment
Share on other sites

Mark Jansen
Posted
Posted
CHeck that you set the radar mode again under "OTHER Set/Display settings.

 

That did the trick. Thanks for your promt reply.

 

Mark

Mark Jansen

Director Dutch VACC

http://www.dutchvacc.nl

Link to comment
Share on other sites

Nikita Kapko 1015297
Posted
Posted

Good day people!

 

Thanks for prompt patch! It's greate!

 

I have two requests:

1) it will be greate to have VATSIM NOTAM about patch, because not all have knew about patch

2) please, make an approptiate changes in EuroScope Wiki

 

Thanks for that and for all!

vaccua_baner.jpg
Link to comment
Share on other sites

Norman Blackburn
Posted
Posted
it will be greate to have VATSIM NOTAM about patch, because not all have knew about patch

 

This was already done.

 

VATSIM Notice to Airmen (NOTAM)

Issued by Richard Jenkins (800012), 28-Jan-2010 23:08 UTC __________________________________________________________________________

 

**Euroscope 3.1**

Gergely Csernak has announced the release of Euroscope 3.1, the most realistic radar client for VATSIM yet. To view the new features check out the relevant announcement in the dedicated forum:

viewtopic.php?f=71&t=45481

 

Download : http://www.euroscope.hu/

On line manual : http://www.euroscope.hu/mediawiki/

Dedicated support forum : viewforum.php?f=71

 

Congratulations to Gergely & team for a great upgrade to Euroscope as well as its docomeentation & support.

Norman

sig_FSLBetaTester.jpg

Link to comment
Share on other sites

Nikita Kapko 1015297
Posted
Posted

This was already done.

Hi Norman!

 

If you carefully read this NOTAM, you can see - there are no any words about patch! There are only info about about 3.1a release. Most people already downloaded ES v3.1a in beginning of January and do not recheck EuroScope official page or VATSIM forum for patch. Cited NOTAM only about ES 3.1, but for patch, I guess, there one more NOTAM needed.

 

Thanks for undestanding!

vaccua_baner.jpg
Link to comment
Share on other sites

Norman Blackburn
Posted
Posted

Sorry, we wouldn't be able to run another notam so soon and only for a patch. If you check the one that went out it covered numerous events including the release of ES 3.1

 

I hope you understand.

Norman

sig_FSLBetaTester.jpg

Link to comment
Share on other sites

Andreas Fuchs
Posted
Posted (edited)

Hi guys,

 

especially for a program that is being programmed actively, and that is definetely true for Euroscope, you will be doing well in regularly checking its website for possible updates.

Edited by Guest
Link to comment
Share on other sites

Nikita Kapko 1015297
Posted
Posted

Yeh Andreas, we (who interested) do so. But not all vATCO of world...

Maybe Gergely will find a way for automaticaly checking for updates by ES. If ES can check sectors automatic download, why not ES updates...

vaccua_baner.jpg
Link to comment
Share on other sites

Andreas Fuchs
Posted
Posted

Hi Niko,

 

I know what you mean. Go ahead and open a new thread in this forum and make that suggestion. Gergely will read it and let you know what he thinks about the idea!

Link to comment
Share on other sites

Gergely Csernak
Posted
Posted

I like this idea. You can expect it

Gergely.

EuroScope developer

Link to comment
Share on other sites

 Share