Jamal Francis-Lewis 110995 Posted May 16, 2014 at 07:17 PM Posted May 16, 2014 at 07:17 PM Ok, so here's my dilema. I was always a user of VRC, but have been slowly transitioning to Euroscope. The problem is that the ARTCC i'm under doesn't use Euroscope as their primary client; which means that my modified POF to ESE file isn't really optimized very well. I took it upon myself to start writing my own ESE file based on the contents of the POF file and the tutorial/guide on the Euroscope wiki page. When i open the "Active airports/runways" window, i'm presented with all the runways in the sector file, but NONE are named/labeled according to what airport they are at. Granted i haven't labeled all the runways in the sector (only the major ones i use/observe), but even those don't show up under the airport column. Would anyone be able to take a look at these files and see what my issue is please? Or point me in the right direction? http://s000.tinyupload.com/index.php?file_id=67808122008477520382 Thanks in advance Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 16, 2014 at 07:56 PM Posted May 16, 2014 at 07:56 PM Hey Jamal, You need to add the airport name in the .sct as described in the manual here: http://www.euroscope.hu/mediawiki/index.php?title=Quick_Start Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Jamal Francis-Lewis 110995 Posted May 16, 2014 at 08:25 PM Author Posted May 16, 2014 at 08:25 PM Hey Jamal, You need to add the airport name in the .sct as described in the manual here: http://www.euroscope.hu/mediawiki/index.php?title=Quick_Start Right, I did that for only like 4 airports in the whole list, but even those aren't labeled in the column. Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 16, 2014 at 08:49 PM Posted May 16, 2014 at 08:49 PM Try not to mix it with airports that are not named. Isolate the ones you need and remove the other ones. And also avoid using the "-" dash in the name of the airport. Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Jamal Francis-Lewis 110995 Posted May 16, 2014 at 08:54 PM Author Posted May 16, 2014 at 08:54 PM So perhaps move the ones needed to the top of that section and comment out all the other runways? Should I use an underscore instead or just a single plain space between the ICAO code and airport name? Link to comment Share on other sites More sharing options...
Jamal Francis-Lewis 110995 Posted May 17, 2014 at 01:55 AM Author Posted May 17, 2014 at 01:55 AM Weird... Commenting out all those runways had no effect. They're still listed in the active airport/runway dialog window Link to comment Share on other sites More sharing options...
Jamal Francis-Lewis 110995 Posted May 17, 2014 at 04:21 AM Author Posted May 17, 2014 at 04:21 AM SOLVED For some reason when I would open the "load sector file" window, euroscope would only see the original .sct2 file and not the version I had been editing. Guess it helps to make sure its loading a file that was modified today and not a few days ago. Also decided to run euroscope as an admin too. Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 17, 2014 at 09:22 AM Posted May 17, 2014 at 09:22 AM The LOAD SECTOR FILE does not remove everything from the memory in regard to the old sector file. Ideally close and reopen EuroScope when testing things besides the map (like logic, sectors, runways in Active Dialog). Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Jamal Francis-Lewis 110995 Posted May 17, 2014 at 11:15 PM Author Posted May 17, 2014 at 11:15 PM The LOAD SECTOR FILE does not remove everything from the memory in regard to the old sector file. Ideally close and reopen EuroScope when testing things besides the map (like logic, sectors, runways in Active Dialog). Makes sense now. Because even when I restarted euroscope it would automatically load the old sector file before I could tell it to load the new one because of it autoloading the last profile/asr file used Link to comment Share on other sites More sharing options...
Recommended Posts