Darren Fletcher Posted November 29, 2006 at 05:20 PM Posted November 29, 2006 at 05:20 PM any have any ideas on this problem vrc connected working twr trainer connected working teamspeak connected working but slowly builds packet loss up to about 15% disconnect vrc and packet loss drops but if twr trainer is not running and i connect vrc everything works fine it only seems to happen with the 3 connected at once i have tested using twr trainer on a sperate machine on the network too and have the same problem so thinking a port issue, any idea what port twr trainer use's? Yours Darren Fletcher Link to comment Share on other sites More sharing options...
Ross Carlson Posted November 29, 2006 at 05:42 PM Posted November 29, 2006 at 05:42 PM 6820 Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Darren Fletcher Posted November 29, 2006 at 05:45 PM Author Posted November 29, 2006 at 05:45 PM cheers i think i just need to make sure my router is setup for that Thxs ross Link to comment Share on other sites More sharing options...
Ross Carlson Posted November 29, 2006 at 05:48 PM Posted November 29, 2006 at 05:48 PM You shouldn't need to touch the router. And even if you did, it would either work or it wouldn't. Partial packet loss is not a symptom of a misconfigured router. Sounds like your network card is just getting overloaded. I had a similar problem with a cheap onboard network card. I could not run VRC and ACSim at the same time with more than a few aircraft. It would drop packets left and right. Once I switched to a good network card, the problem went away. Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Darren Fletcher Posted December 1, 2006 at 12:37 PM Author Posted December 1, 2006 at 12:37 PM Cheers Ross might need to look at that for now it seems putting twrtrainer on my laptop solves the issue for now Darren Link to comment Share on other sites More sharing options...
Recommended Posts