paul westcott Posted June 26, 2008 at 08:10 AM Posted June 26, 2008 at 08:10 AM good day guys, sorry to post this here, but i only have an hour or so to get a reply my 8600gts is going back to the shop and getting replaced under warranty, my question is : is it as easy as just unscrewing it and huling it out? i ask because ive been told about uninstalling drivers first, but surely if im using the same g/c then i dont need to?? if someone could reply to this within the hour that knows, it would be much appreciated cheers guys paul Link to comment Share on other sites More sharing options...
Martin Rosenkjaer 968376 Posted June 26, 2008 at 09:03 AM Posted June 26, 2008 at 09:03 AM Hi ther Paul. Open the maschine and unscrew the card. On the mainboard in the rear end of the slot (away from the vga/dvi outs) there is a small hatch you need to swivel out, away from the card. Then pull it out gentley and it all done. There is no need to uninstall the drivers and even if you should get another type of card it is not essential before the new card is installed. Then how ever i would reccomend you to either change to proper drivers or if the same card make sure they are fully updated. Best Regards, Martin Martin Rosenkjær Eurotest Staff VATSIM Europe Division Link to comment Share on other sites More sharing options...
paul westcott Posted June 26, 2008 at 09:05 AM Author Posted June 26, 2008 at 09:05 AM just what i was needing martin, many thanks sir regards paul Link to comment Share on other sites More sharing options...
Recommended Posts