Darrol Larrok 1140797 Posted February 10, 2010 at 10:29 PM Posted February 10, 2010 at 10:29 PM I am experiencing wild variations in speed, wind and pitch necessary to climb/descend/maintain. It seems similar to the FSInn weatherbug, but the outside temperature looks normal and it occurs when the FSInn weather is turned off. Is it possible this is just nasty turbulence? Any ideas? It just started today. Link to comment Share on other sites More sharing options...
Larry James 901346 Posted February 10, 2010 at 11:05 PM Posted February 10, 2010 at 11:05 PM I am experiencing wild variations in speed, wind and pitch necessary to climb/descend/maintain. It seems similar to the FSInn weatherbug, but the outside temperature looks normal and it occurs when the FSInn weather is turned off. Is it possible this is just nasty turbulence? Any ideas? It just started today. Which weather program is in effect when you're experiencing this? -- L. James -- L. D. James [email protected] www.apollo3.com/~ljames sticky: Not a regular post, but a special thread/message stuck to the top with special meaning… containing important forum information. For FSInn/VATSIM issues, please test the FSInn Installation sticky and linked FAQ. It really works! Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 10, 2010 at 11:07 PM Author Posted February 10, 2010 at 11:07 PM FSX. It was just happening today, and it seems to have alleviated a bit. I think it may have been turbulence, is this possible? Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 10, 2010 at 11:18 PM Author Posted February 10, 2010 at 11:18 PM Nope Wilco A320. Link to comment Share on other sites More sharing options...
Larry James 901346 Posted February 11, 2010 at 05:07 AM Posted February 11, 2010 at 05:07 AM Nope Wilco A320. This you perform the addon's fix provided via the please read sticky of the FSInn Help forum? -- L. James -- L. D. James [email protected] www.apollo3.com/~ljames sticky: Not a regular post, but a special thread/message stuck to the top with special meaning… containing important forum information. For FSInn/VATSIM issues, please test the FSInn Installation sticky and linked FAQ. It really works! Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 11, 2010 at 08:07 PM Author Posted February 11, 2010 at 08:07 PM I looked there just now again, I can't seem to find it. Link to comment Share on other sites More sharing options...
Larry James 901346 Posted February 12, 2010 at 07:03 AM Posted February 12, 2010 at 07:03 AM I looked there just now again, I can't seem to find it. Hi, Darrol. Can you tell me specifically where you looked? I'm hoping to have the two important messages as visible as possible. This is one of the reasons why: PING and VATSIM servers: viewtopic.php?p=342668#p342668 If you haven't read the complete two messages you probably have other annoying issues for which you haven't saw a good description and resolution. Since you posted a few messages in the proper forum it would appear that you might have saw the stickies that are referenced in just about every one of the topics. -- L. James -- L. D. James [email protected] www.apollo3.com/~ljames sticky: Not a regular post, but a special thread/message stuck to the top with special meaning… containing important forum information. For FSInn/VATSIM issues, please test the FSInn Installation sticky and linked FAQ. It really works! Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 12, 2010 at 08:10 PM Author Posted February 12, 2010 at 08:10 PM I looked in the please ready sticky, which only says to check the other stickies and active topics, which I did. I have no idea where to find what your referring, and the link you sent me, I'm not sure what it has to do with this. Sorry about that. Link to comment Share on other sites More sharing options...
Larry James 901346 Posted February 12, 2010 at 10:18 PM Posted February 12, 2010 at 10:18 PM I looked in the please ready sticky, which only says to check the other stickies and active topics, which I did. I have no idea where to find what your referring, and the link you sent me, I'm not sure what it has to do with this. Sorry about that. No problem. My intentions was to give you a chance to review the two messages of the please sticky which, as you say, you have. This was to familiar you with the other important parts to help you avoid any other announce that you might have experience and not had words to describe. The addon’s fix is in the second of the two messages of the please read sticky which resolves just about everything FSInn/VATSIM. It’s Question #8 (“Why does my addons (LevelD Aircraft, other Aircraft panels and gauges, Scenery, etc.) Fail when FSInn is installed?”). Can you tell me the results you get after applying that fix? Thanks for going over the steps with me to try to help resolve this “Weird problem”. If that doesn’t work I’ll look for something else. I’ll always start out with the two messages of the please read sticky. -- L. James -- L. D. James [email protected] www.apollo3.com/~ljames sticky: Not a regular post, but a special thread/message stuck to the top with special meaning… containing important forum information. For FSInn/VATSIM issues, please test the FSInn Installation sticky and linked FAQ. It really works! Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 12, 2010 at 11:08 PM Author Posted February 12, 2010 at 11:08 PM I haven't had the problem since posting this anyway. So I can't tell if it helped. Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 14, 2010 at 02:28 AM Author Posted February 14, 2010 at 02:28 AM I just had this problem again and it seems to be caused by temperature rapidly flickering between 2 close values, such as from 28-30. While this was happening the TAT in my wilco a320 was flicking between -28 and -30. I was at FL360. I was using FSX real world weather. I doubt putting FSCopilot/FSinn at the bottom of DLL.xml would help, since that it is primarily [Mod - Happy Thoughts]ociated with total failures. Link to comment Share on other sites More sharing options...
Larry James 901346 Posted February 14, 2010 at 04:02 AM Posted February 14, 2010 at 04:02 AM I just had this problem again and it seems to be caused by temperature rapidly flickering between 2 close values, such as from 28-30. While this was happening the TAT in my wilco a320 was flicking between -28 and -30. I was at FL360. I was using FSX real world weather. I doubt putting FSCopilot/FSinn at the bottom of DLL.xml would help, since that it is primarily [Mod - Happy Thoughts]ociated with total failures. This is common. People often doubt the merit published resolutions and continue to have problems until they actually perform them. -- L. James -- L. D. James [email protected] http://www.apollo3.com/~ljames sticky: Not a regular post, but a special thread/message stuck to the top with special meaning… containing important forum information. For FSInn/VATSIM issues, please test the FSInn Installation sticky and linked FAQ. It really works! Link to comment Share on other sites More sharing options...
Darrol Larrok 1140797 Posted February 14, 2010 at 04:29 AM Author Posted February 14, 2010 at 04:29 AM I did try doing it, sorry if I wasn't clear before. It was unhelpful. Link to comment Share on other sites More sharing options...
Recommended Posts