Rodger Johnson 1052770 Posted March 8, 2010 at 08:32 AM Posted March 8, 2010 at 08:32 AM A serious problem with my yoke has arrived and its getting worse. About 3 months ago couple of my buttons on my yoke would not work. Ive had this yoke for about 3-4 years. My best guess would be the things are worn out. Now a new button is missing and its a problem because its the hat switch. I cant pan to the left anymore and its makin me mad. I have CH products yoke. Is this problem most likely worn out recievers, or could I clean them out... Or would it just be reasonable to get a whole new yoke. thanks! -Rodger Link to comment Share on other sites More sharing options...
Lennart Vedin Posted March 10, 2010 at 07:39 AM Posted March 10, 2010 at 07:39 AM Typical the CH buttons should not be bad even after many years. Since it is "couple of buttons" it may not be the buttons them self, but may be a board/connector. Tip 1: Open the yoke disconnect/reconnect each connector a couple or times, in an attempt to clean the connectors. Before put back skreews, test the yoke, mecanical part must be exact in correct possition. A good handy people can fix it proper together. / Lennart Vedin / Link to comment Share on other sites More sharing options...
Recommended Posts