Rahul Parkar 0 Posted April 3, 2010 Share Posted April 3, 2010 Hey Guys, I Just made a new Situation file on TWRTrainer, And I can never use it because I get errors, yet my friend can use it just fine at any time... This is bugging me and I'm running Windows XP and running my computer on a DMZ. Any Ideas. Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Ross Carlson 173 Posted April 3, 2010 Share Posted April 3, 2010 Can you use any situation files? Or is it just that one that gives the error? Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to post Share on other sites
Rahul Parkar 0 Posted April 3, 2010 Author Share Posted April 3, 2010 (edited) Hmmm Its all situation files that close up.... It shows a maximum of 5-6 aircraft of situation files that have 9/17 aircraft.... I check my CID and P[Mod - Happy Thoughts]word and they are fine..... This started happening after I got my I1.... could that have anything to do with it? Edited April 3, 2010 by Guest Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 3, 2010 Author Share Posted April 3, 2010 (edited) I Also noticed, They stay there for a few seconds, then i Get the socket closed by xxx error., They will all disappear.... Where i then try to open the air file again, with the same problem Edited April 3, 2010 by Guest Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 3, 2010 Author Share Posted April 3, 2010 (edited) Sorry for the third post, Nope, After making a quick check It is not my firewall.... I disabled it completely and had the same program.... Maybe there are Ports that arent opened properly on my DMZ "has happened before", which ports need to be open for TWRTrainer Edited April 3, 2010 by Guest Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 3, 2010 Author Share Posted April 3, 2010 Wow thats really weird..... Just had another try.... Sorry 4th post.... But after it closed the socket, I opened the air file again, and all the aircraft showed up.... They then start disappearing off my screen again. And more socket errors continue etc. etc. any ideas? Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Ross Carlson 173 Posted April 3, 2010 Share Posted April 3, 2010 TWRTrainer uses the same port as any other VATSIM client, which is 6809, and it doesn't need to be forwarded since it's an outgoing connection. If it's not a firewall issue, and you know your CID and p[Mod - Happy Thoughts]word are right, and you have at least an S3 rating, then I have no clue what could be causing it. Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to post Share on other sites
Rahul Parkar 0 Posted April 3, 2010 Author Share Posted April 3, 2010 Wow.... Think I'll forward this to Luca then and see what he says of it Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Luca Benelli 0 Posted April 4, 2010 Share Posted April 4, 2010 As Ross wrote the software i doubt there's anybody knowing more about it than him And as you are the only one experiencing it i doubt there's much which can be done, but i'll have a look. Luca Benelli - C3 - P2 Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Hmmm, I know this is a long shot, But could there be an issue with my account somewhere lying inside the VATSIM database.... I know its long but maybe something isnt right inside the database and Sweatbox isnt liking me for it?? Best Regards Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Luca Benelli 0 Posted April 4, 2010 Share Posted April 4, 2010 if it worked before becoming an INS i don't see a reason why it should be a problem now. Have you the chance to test it from an another computer using your account? Luca Benelli - C3 - P2 Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Wow.... It does work on my TWRTrainer on my Win7 Comp..... Thats really weird.... Any ideas as to why it would not work on my XP Comp? Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Well, On further examination, ACSIM works just fine... This is a TWRTrainer problem only. Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Michael Pike 1 Posted April 4, 2010 Share Posted April 4, 2010 I had this issue once before when someone in the UK had a large number of aircraft connected. There seemed to be a limit on the number of aircraft in range. Could this be a factor?? (And I'd be interested to know if there is a limit). Mike Pike VATSIM-UK Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Hmmm im not sure, Seeing as when I disconnected my aircraft, My friend could connect them just fine (same situation) and my vis was 10 miles..... But i'm not too sure. Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Ryan Geckler 4 Posted April 4, 2010 Share Posted April 4, 2010 I know that I get these errors when another aircraft with the same callsign is already generated on sweatbox. Ryan Geckler - GK | Former VATUSA3 - Division Training Manager VATSIM Minneapolis ARTCC | FAA Miami ARTCC Cross the Pond Planning Team Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Yeah, Thats very true. But at the same time, My friend can load them up just fine a few seconds after me... And its persistent, I have been trying over the last 2 days to no avail Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Another thing I noticed is that this only happens on my XP computer (My computer) My Dad's computer which is running Win7 does not have this problem, Yet we are both running the same antivirus etc.... Has Anyone else on XP Had this problem or seen this problem before...? Best regards, Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 I Made an error before, I am not getting "Winsock Errors" After a while and it keeps closing the socket host, when I load the Air file, It gives me a "Run-time error '40006': Wrong Protocol or connection state for the requested transaction or request" Maybe that would help? Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Rahul Parkar 0 Posted April 4, 2010 Author Share Posted April 4, 2010 Fixed - Had to reformat my HDD anyway, and that seemed to do the trick. Rahul Parkar "On second thoughts Nappa, catch it, catch it with your teeth" -- Vegeta Professional Nerd. (Professionally not professional) Link to post Share on other sites
Ross Carlson 173 Posted April 4, 2010 Share Posted April 4, 2010 I wonder if somehow TWRTrainer was blocked from opening 'net connections. That's the only thing I can think of if ACSim worked with the same credentials. Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to post Share on other sites
Octavio Germosen 0 Posted December 28, 2010 Share Posted December 28, 2010 All, I'm experiencing the same problem when opening more than one Aircraft File or loading more than 5 aircrafts into TWR Trainer. I just posted this: http://forums.vatsim.net/viewtopic.php?f=50&t=53838&p=394301#p394301 Could you please [Mod - Happy Thoughts]ist me? Thanks, Octavio Octavio Germosen ATM Santo Domingo FIR VATSIM Caribbean Division (VATCAR) Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now