My sector line will not show up when they are susposed to.

[Nigil Lee 1068478]

I have to sectors defined: NY_CAM_APP_SECT & NY_KFI_NE_SECT. I want a line to show up between then using the following sector line.

SECTORLINE:JFKArea13_JFKArea12
DISPLAY:NY_CAM_APP_SECT:NY_CAM_APP_SECT:NY_KFI_APP_NE_SECT
DISPLAY:NY_KFI_APP_NE_SECT:NY_CAM_APP_SECT:NY_KFI_APP_NE_SECT
COORD:N040.25.57.995:W074.04.52.549
COORD:N040.25.18.899:W074.04.20.013
COORD:N040.24.41.777:W074.04.2.358
COORD:N040.23.31.323:W074.03.40.456
COORD:N040.22.22.416:W074.03.27.187
COORD:N040.21.20.234:W074.03.28.238
COORD:N040.21.12.201:W074.03.29.817
COORD:N040.19.18.384:W073.59.40.806
COORD:N040.16.19.153:W073.58.28.781

Euroscope recognizes the sector owners as different but never displays the sector line. Anybody see anything i'm doing wrong?

[Todor Atanasov 878664]

I have to sectors defined: NY_CAM_APP_SECT & NY_KFI_NE_SECT. I want a line to show up between then using the following sector line.

SECTORLINE:JFKArea13_JFKArea12
DISPLAY:NY_CAM_APP_SECT:NY_CAM_APP_SECT:NY_KFI_APP_NE_SECT
DISPLAY:NY_KFI_APP_NE_SECT:NY_CAM_APP_SECT:NY_KFI_APP_NE_SECT
COORD:N040.25.57.995:W074.04.52.549
COORD:N040.25.18.899:W074.04.20.013
COORD:N040.24.41.777:W074.04.2.358
COORD:N040.23.31.323:W074.03.40.456
COORD:N040.22.22.416:W074.03.27.187
COORD:N040.21.20.234:W074.03.28.238
COORD:N040.21.12.201:W074.03.29.817
COORD:N040.19.18.384:W073.59.40.806
COORD:N040.16.19.153:W073.58.28.781

Euroscope recognizes the sector owners as different but never displays the sector line. Anybody see anything i'm doing wrong?

 

SECTORLINE:JFKArea13_JFKArea12

DISPLAY:NY_CAM_APP_SECT:NY_CAM_APP_SECT:NY_KFI_APP_NE_SECT

DISPLAY:NY_KFI_APP_NE_SECT:NY_KFI_APP_NE_SECT:NY_CAM_APP_SECT

COORD:N040.25.57.995:W074.04.52.549

COORD:N040.25.18.899:W074.04.20.013

COORD:N040.24.41.777:W074.04.2.358

COORD:N040.23.31.323:W074.03.40.456

COORD:N040.22.22.416:W074.03.27.187

COORD:N040.21.20.234:W074.03.28.238

COORD:N040.21.12.201:W074.03.29.817

COORD:N040.19.18.384:W073.59.40.806

COORD:N040.16.19.153:W073.58.28.781

 

Does this work?

[Nigil Lee 1068478]

No it didn't work I have the sectors defined as followes

KFI

SECTOR:NY_KFI_APP_NE_SECT:0:4000
OWNER:2A:2G:B3:B4
ACTIVE:KJFK:04R
ACTIVE:KJFK:13L
ARRAPT:KJFK
BORDER:JFKArea13_JFKArea12:JFKArea12_JFKArea14a:JFKArea12s_JFKArea14:Final_S_FINAL_N:Final_S_FINAL_W

CAM

SECTOR:NY_CAM_APP_SECT:0:4000
OWNER:2G:B3:B4
ACTIVE:KJFK:31R
ACTIVE:KJFK:22L
ARRAPT:KJFK
BORDER:JFKArea13_JFKArea12:JFKArea12_JFKArea14:JFKArea12_JFKArea8

[Juha Holopainen]

I don't see any obvious issues with the sector definitions there (other than the rather restrictive active runway definitions). How did you check that the sectors had different owners? To be sure, check the Sector ownership setup dialog for the owners. If the owners are different there, the next things I'd check are the General settings to make sure that "Display airspace lines" is checked and the Symbology settings to see that the sector line is set to a color that is surely visible.

[Nigil Lee 1068478]

Yeah "Display airspace lines" is check. The sector lines are selected to show up blue and under sector ownership it does show that the sectors are owned by different people. Is there anyway I can send somebody the entire file to check out?

[Todor Atanasov 878664]

xumepoc(_at_)abv(dot)bg