Alex Burrow 1141056 Posted July 13, 2011 at 04:35 AM Posted July 13, 2011 at 04:35 AM Whenever I try and connect via VRC, It always comes up with TXT ONLY below the frequency. I have kept trying to calibrate my mike but the background noise is always too loud or the squelch is too high- fluctuates from 200-2000. Any ideas on how to fix it? I have tried adjusting the mixer and ticking RX and TX on the comms panel. Alex Burrow VATNZ6 - Pilot Operations Director Link to comment Share on other sites More sharing options...
Ross Carlson Posted July 13, 2011 at 06:58 AM Posted July 13, 2011 at 06:58 AM Whenever I try and connect via VRC, It always comes up with TXT ONLY below the frequency. I have kept trying to calibrate my mike but the background noise is always too loud or the squelch is too high- fluctuates from 200-2000.Any ideas on how to fix it? I have tried adjusting the mixer and ticking RX and TX on the comms panel. What happens when you tick HDST or SPKR on the comms panel? Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Ernesto Alvarez 818262 Posted July 13, 2011 at 01:22 PM Posted July 13, 2011 at 01:22 PM make sure you have the voice channel and voice server filled out correctly aswell voice channel = name of the channel, not the address. (Ex: ABC_TWR) voice server = address of the channel, without the http part Link to comment Share on other sites More sharing options...
Recommended Posts