Problem with airport layout

[Aaron Schpitzer 1174936]

I'm merging a few sectorfiles so that when I guest controll I don't have to keep switching, n just cause I'd lke to learn how to make them. This is what keeps happening when I add airport ground layout in [sTAR]

 

 

The "GROUND (CZYZ)" works fine, but the "GROUND (CZUL)" doesn't, to get the CZUL up you have to check the coordinates. This is some of the code I have below below: (there are 26 spaces but it looks weird cause txt at begining of some)

 

[sTAR]

GROUND (CZYZ) N040.00.00.000 W080.00.00.000 N040.00.00.000 W080.00.00.000 Fuchsia

...............

 

GROUND (CZUL) N040.00.00.000 W080.00.00.000 N040.00.00.000 W080.00.00.000 Fuchsia

; Mirabel

;- CYMX_06_24

N045.40.14.159 W074.01.19.239 N045.40.12.765 W074.01.17.226 Runway

N045.40.12.765 W074.01.17.226 N045.41.36.570 W073.59.17.822 Runway

N045.41.36.570 W073.59.17.822 N045.41.37.961 W073.59.19.811 Runway

N045.41.37.961 W073.59.19.811 N045.40.14.159 W074.01.19.239 Runway

;- CYMX_11_29

N045.40.15.511 W074.05.19.603 N045.40.13.437 W074.05.20.059 Closed

N045.40.13.437 W074.05.20.059 N045.39.56.123 W074.02.32.947 Closed

N045.39.56.123 W074.02.32.947 N045.39.58.147 W074.02.32.508 Closed

N045.39.58.147 W074.02.32.508 N045.40.15.511 W074.05.19.603 Closed

;- CYMX_Taxi_TABLIER

N045.40.15.558 W074.05.19.637 N045.40.16.025 W074.05.20.339 Taxi

N045.40.16.025 W074.05.20.339 N045.40.19.000 W074.05.22.841 Taxi

N045.40.19.000 W074.05.22.841 N045.40.20.995 W074.05.25.645 Taxi

N045.40.20.995 W074.05.25.645 N045.40.23.115 W074.05.26.613 Taxi

N045.40.23.115 W074.05.26.613 N045.40.24.896 W074.05.24.942 Taxi

N045.40.24.896 W074.05.24.942 N045.40.25.227 W074.05.21.735 Taxi

N045.40.25.227 W074.05.21.735 N045.40.25.042 W074.05.18.833 Taxi

N045.40.25.042 W074.05.18.833 N045.40.26.790 W074.05.06.947 Taxi

N045.40.26.790 W074.05.06.947 N045.40.33.716 W074.05.06.046 Taxi

N045.40.33.716 W074.05.06.046 N045.40.33.127 W074.05.14.358 Ramp

N045.40.33.127 W074.05.14.358 N045.40.41.803 W074.05.13.062 Ramp

N045.40.41.803 W074.05.13.062 N045.40.40.706 W074.04.55.847 Ramp

N045.40.40.706 W074.04.55.847 N045.40.34.439 W074.04.56.416 Ramp

N045.40.34.439 W074.04.56.416 N045.40.33.982 W074.05.02.874 Ramp

N045.40.33.982 W074.05.02.874 N045.40.27.217 W074.05.03.723 Taxi

N045.40.27.217 W074.05.03.723 N045.40.29.100 W074.04.47.781 Taxi

N045.40.29.100 W074.04.47.781 N045.40.29.125 W074.04.46.224 Taxi

N045.40.29.125 W074.04.46.224 N045.40.25.219 W074.04.02.898 Taxi

N045.40.25.219 W074.04.02.898 N045.40.30.434 W074.04.01.690 Taxi

N045.40.30.434 W074.04.01.690 N045.40.27.047 W074.03.25.206 Taxi

 

 

 

Any help is appreciated

[Jacques Malan 995061]

Hi Aaron,

 

This happens if the item that you are defining and the colour have the same name. For example:

 

[GEO]

;CYMM_01_19

Runway N045.40.14.159 W074.01.19.239 N045.40.12.765 W074.01.17.226 Runway

N045.40.12.765 W074.01.17.226 N045.41.36.570 W073.59.17.822 Runway

N045.41.36.570 W073.59.17.822 N045.41.37.961 W073.59.19.811 Runway

N045.41.37.961 W073.59.19.811 N045.40.14.159 W074.01.19.239 Runway

 

I don't see this in your code, but you should just examine it carefully.

 

Another reason is that the colour is not defined in the beginning of the file.

[Todor Atanasov 878664]

Ammm....I'm not 100% if ES follows the rules regarding .sct format (I know it is more flexible), but the format of SID/STAR is 26 characters for the name (if the name is less then 26, the rest of the name must be with spaces to make the length 26) then the coordinates, then an optional colour. You are missing the names....and I'm not sure why do you add a GEO info in SID/STAR section....

[Gergely Csernak]

The "Invalid line name in sector ..." does not reference to your SCT file. It comes from an ESE loading. When you are defining the border of SAULTHIGH sector you are referencing to CZYZ_CZEG sectorline. But the definition of that line is missing. Be sure to define the borderline prior the sector.