Phill Powell 849479 Posted September 28, 2013 at 03:08 PM Posted September 28, 2013 at 03:08 PM Compound warning item - This item combines the following warning flags in this priority order: Emergency indicator Radio failure indicator Hijack indicator Collision alert Squawk error Duplicated squawk flag CLAM/RAM warning Hi, I'm using 3.1d and the compound warning item is selected in the tag definition. The warning works for everything except the duplicate squawk flag. Is this an error or am I looking in the wrong place. Regards Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Gergely Csernak Posted October 5, 2013 at 10:05 AM Posted October 5, 2013 at 10:05 AM In the code only the VFR squawks and the simulated data is not concerned when checking duplicates. Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted October 5, 2013 at 11:44 AM Author Posted October 5, 2013 at 11:44 AM (edited) Hi Gergely, I was controlling EISN_CTR and had been on about 2 minutes when I accidentally [Mod - Happy Thoughts]igned a duplicate squawk to a departure. It seems that EICK_TWR had already issued this squawk (6651) to an earlier departure which was still in my airspace. There was no indication of any code error although both were squawking 6651. Strangely, last night whilst on EGGP_APP I saw two tags in an adjacent sector that were displaying DUPE. I'll have a closer look at these two profiles and see if there is anything obvious. Many thanks for the response. Phill Edited April 6, 2014 at 02:42 PM by Guest Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 6, 2014 at 02:38 PM Author Posted April 6, 2014 at 02:38 PM I know this thread is 6 months old but I still have the problem. I never get a DUPE warning. I've tried a completely different set of tags from another VACC and still it persists. I'm going to back up both Euroscope folders and reinstall. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 7, 2014 at 06:47 PM Author Posted April 7, 2014 at 06:47 PM Complete re-install of Euroscope did not solve the problem. No plugins "Duplicated squawk - If the [Mod - Happy Thoughts]igned squawk is used by another aircraft then a static #DUPE# string. Otherwise empty." All the other static strings work. CLAM RAM CA HIJ RAD and EMG. It's like the string is missing. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted April 7, 2014 at 07:32 PM Posted April 7, 2014 at 07:32 PM Can I ask how do you check that you have a duplicated code situation in the airspace? EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 8, 2014 at 07:08 AM Author Posted April 8, 2014 at 07:08 AM Hi Todor, Thanks for the reply. Two methods. 1 Run a scenario file and issue the same squawk to two a/c. 2 On the network, get two a/c to squawk the same. They do but I don't see this below. This taken from another controller's screen grab. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted April 8, 2014 at 08:08 AM Posted April 8, 2014 at 08:08 AM Which squawks have you defined as VFR in ES? EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 8, 2014 at 08:15 AM Author Posted April 8, 2014 at 08:15 AM Hi Todor, 1200,2000,2200,7000 in general settings. Should DUPE show up on IFR as well? If so it doesn't. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted April 8, 2014 at 09:21 AM Posted April 8, 2014 at 09:21 AM DUPE is only for IFR squawks. Can you show me a screenshot with IFR duplicated squawks without the warning? EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 8, 2014 at 12:33 PM Author Posted April 8, 2014 at 12:33 PM Mathias tags. Both aircraft [Mod - Happy Thoughts]umed by EGGP_APP. Thanks for saying that it only works for IFR I wasn't sure. Also I should remove 2000 and 2200 from the VFR list. Thanks Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted April 8, 2014 at 03:54 PM Posted April 8, 2014 at 03:54 PM Where you EGGP_APP on the screen shot or you were observer/another ATCO? EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 8, 2014 at 07:08 PM Author Posted April 8, 2014 at 07:08 PM Hi, again! I was EGGP_APP at the time. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted April 8, 2014 at 08:17 PM Posted April 8, 2014 at 08:17 PM Well I see both of the tracks as untagged, where they untagged or tagged? Because you said that you are using Matias, and that datatag family doesn't have a warning item in the uncorrelated/untagged mode. EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 8, 2014 at 09:13 PM Author Posted April 8, 2014 at 09:13 PM Hi Todor, Sorry, they are both tagged by EGGP_APP but shown tag down so you see the squawk code. In general settings/tag display options there are ticks in all 6 boxes. Note that the DUPE does not display on any tag set I have ie Eurocat 2000E etc. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 11, 2014 at 02:44 PM Author Posted April 11, 2014 at 02:44 PM Not sure it's relevant but I believe that the screen shot showing DUPE might be in ES 3.1a. Does anyone get it to work in 3.1d? Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Michael Pike Posted April 14, 2014 at 07:58 PM Posted April 14, 2014 at 07:58 PM I don't recall seeing a DUPE message for years but I [Mod - Happy Thoughts]umed that was because we use VCA or ATCA which avoid them. However the other day, another controller reported an aircraft wrongly correlated and I later realised I had an aircraft with the same squawk heading in the opposite direction. They had both correlated correctly for me and no DUPE messages. Presumably the DUPE text would only appear on un-correlated aircraft (and therefore C-Mode Correlation only)? Mike Pike VATSIM-UK Link to comment Share on other sites More sharing options...
Phill Powell 849479 Posted April 15, 2014 at 05:56 PM Author Posted April 15, 2014 at 05:56 PM Thanks for the input Mike. Like you it's been a long time since I saw a DUPE. I only realised it when another controller pointed out that I had two aircraft with the same squawk. Happens sometimes when two controllers are manually [Mod - Happy Thoughts]igning squawks. I'm not sure whether the other (third) controller was using Euroscope or VRC but I'll find out. Thanks again. Phill Vatsim network supervisor VATeud I1/VATeir local examiner. Link to comment Share on other sites More sharing options...
Recommended Posts