Rihards Bauga 1147153 Posted May 12, 2014 at 06:53 PM Posted May 12, 2014 at 06:53 PM I'm getting an error when launching "EuroScope.exe". Tried reinstalling it twice, also deleted registry entries [Mod - Happy Thoughts]ociated with EuroScope application - didn't help. Any help appreciated. Regards. Rihards Bauga ATCO Instructor Latvia vACC ACCLAT5 | Latvia vACC | http://www.lv-vacc.org Link to comment Share on other sites More sharing options...
Tim Wong Posted May 12, 2014 at 07:14 PM Posted May 12, 2014 at 07:14 PM Has been solved by some other people. Maybe it will help you, too - good luck: viewtopic.php?f=71&t=64857&p=467263#p467262 Do you want your Virtual Airline to become an official partner on VATSIM or to participate in the VAA Program? Visit https://www.vatsim.net/pilots/virtual-airlines Tim Wong Director of Virtual Airline Relations VATSIM.net Virtual Airlines and Special Operations Administration Link to comment Share on other sites More sharing options...
Dante Nikolovski 1262085 Posted May 12, 2014 at 09:05 PM Posted May 12, 2014 at 09:05 PM Everything resolved except the large window I have, using the "tab" key to get to the "Log on" button. Thank you for your help. Dante Nikolovski Training Director at MACvACC VATEUD Divisional Instructor [email protected] Link to comment Share on other sites More sharing options...
Merik Nanish 1184142 Posted May 14, 2014 at 02:10 PM Posted May 14, 2014 at 02:10 PM Thanks for the great work Gergely! One minor issue btw: When I open ES 3.2, it contacts the ES website for a version check, then responds that "you have the latest beta version". I think you need to update that response from the server-side. NYARTCC Facility Engineer and Instructor Link to comment Share on other sites More sharing options...
Gergely Csernak Posted May 16, 2014 at 01:23 PM Author Posted May 16, 2014 at 01:23 PM One minor issue btw: When I open ES 3.2, it contacts the ES website for a version check, then responds that "you have the latest beta version". I think you need to update that response from the server-side. Yes, I realized that also. I hope that it does not brother anyone too much Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Ga�«tan Petit 1201212 Posted June 30, 2014 at 02:08 PM Posted June 30, 2014 at 02:08 PM Hello everybody, Just one question: How work the predefined taxi routes and in what situation can I use it? What produced effects are shown on screen (line, dot)? Sincerly Link to comment Share on other sites More sharing options...
Gergely Csernak Posted July 6, 2014 at 09:56 AM Author Posted July 6, 2014 at 09:56 AM Hi, At the moment the predefined taxi routes can be used only when you issue a taxi instruction to a simulated plane in a simulation session. In the upcoming fix patch you will be able to show them on the screen as well. Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Matthew Moy 1288933 Posted March 9, 2015 at 04:10 PM Posted March 9, 2015 at 04:10 PM (edited) How can I install the 3.2a beta version ? Edited June 20, 2015 at 10:10 AM by Guest Link to comment Share on other sites More sharing options...
Jonas Kuster Posted March 9, 2015 at 09:55 PM Posted March 9, 2015 at 09:55 PM There is a link provided in the text box at the bottom on startup of the program. http://euroscope.hu/installbeta/changes.html Jonas Kuster Network Supervisor Leader Operation vACC Switzerland | vacc.ch @vaccswitzerland GNG Support Team | gng.aero-nav.com ES Plugin Developer | CCAMS Link to comment Share on other sites More sharing options...
Matthew Moy 1288933 Posted March 10, 2015 at 09:47 AM Posted March 10, 2015 at 09:47 AM There is a link provided in the text box at the bottom on startup of the program. http://euroscope.hu/installbeta/changes.html Thanks, I just copy everything in the directory of Euroscope ? Link to comment Share on other sites More sharing options...
Jonas Kuster Posted March 10, 2015 at 11:38 AM Posted March 10, 2015 at 11:38 AM Yep Jonas Kuster Network Supervisor Leader Operation vACC Switzerland | vacc.ch @vaccswitzerland GNG Support Team | gng.aero-nav.com ES Plugin Developer | CCAMS Link to comment Share on other sites More sharing options...
Matthew Moy 1288933 Posted March 10, 2015 at 11:47 AM Posted March 10, 2015 at 11:47 AM Thank you. Link to comment Share on other sites More sharing options...
Ngo Dac Nhat Quang 1187386 Posted May 22, 2015 at 02:29 PM Posted May 22, 2015 at 02:29 PM Hello all, I just wonder myself doest ES have the function like that If we want send the latest METAR at one airport to the traffic flying, Could we do it by one click and METAR text will send to traffic like text? Ngo Dac Nhat Quang VATSEA Instructor Link to comment Share on other sites More sharing options...
Matthew Gunn 964355 Posted May 23, 2015 at 07:11 PM Posted May 23, 2015 at 07:11 PM You can create aliases to pick up a particular a/c dep or arr metar as long as you have the airport in your metar list, along the lines of: .ma current weather at your destination is $metar($arr) .md for info local weather at departure airport is $metar($dep) but you have to F2 (airport ICAO) before you use it if you have not already downloaded that metar into euroscope hope that is what you were after.. Matt Link to comment Share on other sites More sharing options...
Ngo Dac Nhat Quang 1187386 Posted May 24, 2015 at 12:49 AM Posted May 24, 2015 at 12:49 AM Thanks Matt, I will try using it Ngo Dac Nhat Quang VATSEA Instructor Link to comment Share on other sites More sharing options...
Alexey Kaznakov Posted February 13, 2017 at 04:40 PM Posted February 13, 2017 at 04:40 PM Hello. I've bumped into a crush of ES 3.2 (r12) wnen trying to connect under FSS. Does anyone have the same problem? Link to comment Share on other sites More sharing options...
Lewis Hardcastle Posted February 17, 2017 at 04:25 PM Posted February 17, 2017 at 04:25 PM (edited) Hello. I've bumped into a crush of ES 3.2 (r12) wnen trying to connect under FSS. Does anyone have the same problem? I have the same with _CTR. Re-installed few times and ensured c++ redist installed. Also deleted the msvcr100.dll and the other 2 so they'd re-build or use from syswow64 folder as someone suggested previously. Any other ideas? Edited February 20, 2017 at 06:37 PM by Guest Over 150,000 flightplans in the Real World Flightplan Database Link to comment Share on other sites More sharing options...
Jonas Kuster Posted February 18, 2017 at 02:04 PM Posted February 18, 2017 at 02:04 PM I experienced sometimes that the SectorFileProviderDescriptor.txt can cause this kind of problems. Try once to delete that file (it will be recreated on the next ES startup). Does that help anything? Jonas Kuster Network Supervisor Leader Operation vACC Switzerland | vacc.ch @vaccswitzerland GNG Support Team | gng.aero-nav.com ES Plugin Developer | CCAMS Link to comment Share on other sites More sharing options...
Lewis Hardcastle Posted February 20, 2017 at 06:44 PM Posted February 20, 2017 at 06:44 PM I experienced sometimes that the SectorFileProviderDescriptor.txt can cause this kind of problems. Try once to delete that file (it will be recreated on the next ES startup). Does that help anything? Didn't work for me, but thanks Similar symptoms to the below thread, except my setup, doesn't involve vSMR. Managed to manually remove the 3 .dll above and then re-install x86 redist, but this only worked during the first launch and connection to the network. https://community.vatsim.uk/topic/33969-euroscope-32-beta/ https://community.vatsim.uk/topic/29766-euroscope-32-dll-issue/ Any other ideas anyone? Over 150,000 flightplans in the Real World Flightplan Database Link to comment Share on other sites More sharing options...
Magnus Meese Posted February 28, 2017 at 11:01 PM Posted February 28, 2017 at 11:01 PM My r12 has crashed consistenly every time I connect (not at software startup). Tonight, I reinstalled every single C++ redist package for both 32 and 64bit, did a clean install of ES and cleaned out mydocs/euroscope, without any change. Then, in a desperate attempt to try something after playing around for 90 mintues with read-only settings, deleting some setting files, changing .exe-compabilities etc, I went into Win7's personalization page. I swapped basic for Aero, and it worked! Then I restarted ES to see if it was recreatable, and it crashed. Then I changed back to Basic, and now it works on every login, weirdly. I do expect it to run into a crashing streak again sooner rather than later, but there's definately some arbitrary link between the .dll's used, the C++2010 package and the win7 (possibly win10?) background theme. UPDATE: Might have been too quick on this one. Now, a night's sleep and a restart later, this method doesn't yield anything at all. The quest continues. Link to comment Share on other sites More sharing options...
Magnus Meese Posted August 18, 2017 at 07:08 PM Posted August 18, 2017 at 07:08 PM This issue seems to be gone now for all beta versions, I believe the reason is I went ahead and ensured that my WIN user had full ownership of all system folders, using the registry trick to add "Take Ownership" to the right click context menu (google this, guides for both win7 and win10, but as with everything in OS setup, be very carefull and take backups). Link to comment Share on other sites More sharing options...
Daniel Rechberger Posted November 24, 2017 at 12:29 PM Posted November 24, 2017 at 12:29 PM Hey there! First - EuroScope is a great vATC client - keep the work up! Second: I am teaching myself C++ (GNU at first, MS-variant later) and would appreciate a reasonable up-to-date docomeentation of the Plugin-API - anyone got a link? I am also trying to access the WIKI of euroscope.hu, and either load endlessly or get straight a 404-HTTP Error. Kindest, Daniel Link to comment Share on other sites More sharing options...
Recommended Posts