Michael Pike Posted May 13, 2014 at 11:30 PM Posted May 13, 2014 at 11:30 PM In the Connect Dialog, when I click any Browse button to select a scenario, log fie or playback file ES immediately crashes. This happens whether Connect to VATSIM is ticked or not and whether Run as Administrator or not. Event viewer shows the message:- Faulting application name: EuroScope.exe, version: 3.1.5.5, time stamp: 0x536a7f0f Faulting module name: SHELL32.dll, version: 6.3.9600.17055, time stamp: 0x532924d8 Exception code: 0xc0000005 Does look like a Windows-related problem. Is it worth re-installing ES 3.2? I have 3.1d on the system as well and that opens files through the Browse button without any problem. Mike Pike VATSIM-UK Link to comment Share on other sites More sharing options...
Syam Haque 1161585 Posted May 14, 2014 at 12:37 AM Posted May 14, 2014 at 12:37 AM This also occurred to me and not in the Connect Dialog box. I was trying to save a chat to a file and pressed "Save chat to a file" under OTHER SET on the menu. I was greeted by a "Euroscope is not responding" box and then Euroscope crashed. I am also running Windows 8.1. Same message on Event viewer as Michael Faulting application name: EuroScope.exe, version: 3.1.5.5, time stamp: 0x536a7f0f Faulting module name: SHELL32.dll, version: 6.3.9600.17055, time stamp: 0x532924d8 Exception code: 0xc0000005 VATSIM Middle East Syam Haque - 1161585 Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 14, 2014 at 08:49 AM Posted May 14, 2014 at 08:49 AM This is something that happened in beta but we were able to reproduce on a single computer and we believed it was a machine problem rather than a software problem. We will get back to you to try to debug this. Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Maciej Lapoc 890272 Posted May 15, 2014 at 08:39 AM Posted May 15, 2014 at 08:39 AM The same to me- when I try to do anything with upper menu [load sector file, load settings etc] ES crashes with announcement "system handles with problem running ES, we are looking for solution". This is fresh Windows 8.1 installation on new computer. www.pl-vacc.org Link to comment Share on other sites More sharing options...
Michal Fira Posted May 15, 2014 at 11:00 AM Posted May 15, 2014 at 11:00 AM Well, Gergely for sure is now aware of this, i think we will have to wait until it's fixed - lets stay tuned Michal Fira (1117392) C3 VATSIM Network Supervisor and Membership Manager - NA Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 15, 2014 at 11:10 AM Posted May 15, 2014 at 11:10 AM For whoever is eager to use it until then can use it in a portable mode. Batch command: START /D "EuroScope" EuroScope.exe ../Romania.prf Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Michael Pike Posted May 15, 2014 at 03:25 PM Author Posted May 15, 2014 at 03:25 PM Thanks Eric. I should make clear that when I open ES the dialog that opens automatically for me to select a profile, works fine and I can start ES. What I was keen to do but can't is run a scenario - no way to select the scenario file, even if I type the whole path in manually. The Browse button in the FSD server dialog works as expected, but of course the file is not opened from there. Happy to wait for a fix, just trying to provide as much info as possible. I still have my W7 laptop available so I can use that for scenarios. Also confirming that ES 3.1d works fine on W8.1 Mike Pike VATSIM-UK Link to comment Share on other sites More sharing options...
Eric Bocaneanu 906549 Posted May 15, 2014 at 08:34 PM Posted May 15, 2014 at 08:34 PM Michael, Strange to hear that typing doesn't work. In any case, the symptoms are the same on my setup (and I'm on Windows 8.1 Update 1). The profile window works fine but not any other Browse. To load the scenario from the FSD server you need to add a prefix at the top of the scenario file: PSEUDOPILOT: PSEUDOPILOT:EBBR_P_CTR The callsign is the simulator which connects as Start Sweatbox. Eric Bocaneanu ROvACC Director Link to comment Share on other sites More sharing options...
Michael Pike Posted May 16, 2014 at 12:18 AM Author Posted May 16, 2014 at 12:18 AM Thanks very much Eric. You're right it does work if I type in the full path for the scenario. So I've got it going now, thanks again. (I had failed to put localhost in the server box.) Mike Pike VATSIM-UK Link to comment Share on other sites More sharing options...
Michal Fira Posted May 22, 2014 at 11:02 PM Posted May 22, 2014 at 11:02 PM Guys, i think that i have found a fix for it. I have change the compatibility mode to Windows XP (SP 3) of Euroscope.exe, removed all that invalid DLLs with names mfcm***.dll mfc***.dll msvcm***.dll (which cames with newest ES) etc and moved the old dlls (i've uploaded them here - http://www.speedyshare.com/2YQ7C/Fix.rar) and it worked out for me. ES is not crashing while "browsing" the files using any options like "browse" "save chatlog to the file.." or "load sectorfile..." Hope it helps, Michal Michal Fira (1117392) C3 VATSIM Network Supervisor and Membership Manager - NA Link to comment Share on other sites More sharing options...
Ryan Easte Posted May 30, 2014 at 01:29 AM Posted May 30, 2014 at 01:29 AM This fix worked for me thanks mate, was missing alot of those Dll's Link to comment Share on other sites More sharing options...
Gergely Csernak Posted June 15, 2014 at 03:40 PM Posted June 15, 2014 at 03:40 PM While we are testing for a final solution I found that this crash happens only in case the profile selection dialog is opened at startup. If you check the auto load profile and the file selection is not opened that time then all the rest work fine. At least it was tested in one machine. The suggestion is: - Use auto load profile. - If you would like to change your profile: - Uncheck it. - Select the new profile at startup. - Check it again and quit. - Start with the new profile, but automatically. Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Bert Galjaard 1205990 Posted September 28, 2014 at 12:22 PM Posted September 28, 2014 at 12:22 PM While we are testing for a final solution I found that this crash happens only in case the profile selection dialog is opened at startup. If you check the auto load profile and the file selection is not opened that time then all the rest work fine. At least it was tested in one machine. The suggestion is: - Use auto load profile. - If you would like to change your profile: - Uncheck it. - Select the new profile at startup. - Check it again and quit. - Start with the new profile, but automatically. I tested it on my new windows 8.1 computer and it works fine. Thank you Link to comment Share on other sites More sharing options...
Bryan Pool 1309809 Posted December 22, 2014 at 01:50 PM Posted December 22, 2014 at 01:50 PM While we are testing for a final solution I found that this crash happens only in case the profile selection dialog is opened at startup. If you check the auto load profile and the file selection is not opened that time then all the rest work fine. At least it was tested in one machine. The suggestion is: - Use auto load profile. - If you would like to change your profile: - Uncheck it. - Select the new profile at startup. - Check it again and quit. - Start with the new profile, but automatically. How do I stop the profile selection diolog at startup? New with using this program. Link to comment Share on other sites More sharing options...
Gergely Csernak Posted January 11, 2015 at 11:06 AM Posted January 11, 2015 at 11:06 AM Use the command line option is the easiest way: http://www.euroscope.hu/mediawiki/index.php?title=Starting_EuroScope Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Bahaeddine El-Zarif Posted December 31, 2017 at 08:11 PM Posted December 31, 2017 at 08:11 PM I have got a new laptop with windows 8.1 and when I try to load a new sector file, it crashes. Current version is Euroscope 3.2 (I don't think I've installed any beta versions). Windows 8.1 64 bit OS Link to comment Share on other sites More sharing options...
Chriss Klosowski Posted January 1, 2018 at 09:02 AM Posted January 1, 2018 at 09:02 AM Hmm that is weird. I used to run Euroscope on 8.1 with no issues. However try to install the latest packages required for euroscope to work (the netframework) and see if that works if not run as admin. CHRISS KLOSOWSKIDivision Director, VATSIM Middle East & North Africa VATSIM Network Senior Supervisor, Team 5 [email protected] http://vatsim.me/ Link to comment Share on other sites More sharing options...
Bahaeddine El-Zarif Posted January 1, 2018 at 04:05 PM Posted January 1, 2018 at 04:05 PM Hmm that is weird. I used to run Euroscope on 8.1 with no issues. However try to install the latest packages required for euroscope to work (the netframework) and see if that works if not run as admin. I did install the latest Euroscope beta and removed the VCA DLL file that happened to exist on my PC for some reason. It worked afterwards. Link to comment Share on other sites More sharing options...
Recommended Posts