Stephen Odgaard Posted January 22, 2017 at 07:11 PM Posted January 22, 2017 at 07:11 PM Hi Ross, Previously in v1 I was able to have my PTT configured via Traffic Proxy on the Sim PC, and The transmit button down/up send to the remote vPilot PC w Voice. This does not seem to function in the Host + Remote_w_Voice setup. I have configured a PTT on the Host PC as a joystick button. Any ideas? /Stephen BR Stephen Slot Odgaard VATSCA C3 Member since 2004 P3D v 5: Jeehell A320, Skalarki... MSFS w FlyByWire A320 mod, VR Reverb G2 Link to comment Share on other sites More sharing options...
Ross Carlson Posted January 22, 2017 at 07:17 PM Posted January 22, 2017 at 07:17 PM It certainly should work ... can you please open the debug window on both the host and the remote and then press the PTT on your host and see if any relevant messages appear in the debug windows? Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Stephen Odgaard Posted January 22, 2017 at 08:48 PM Author Posted January 22, 2017 at 08:48 PM Hmm. Seems the problem is actually a different. That it has cought a joystick switch which is on, rather than the one I thought I had selected... Now the question is then how to byp[Mod - Happy Thoughts] that selection, and get vPilot to identify the key which experiences a state change after the PTT button selection process is started. BR Stephen Slot Odgaard VATSCA C3 Member since 2004 P3D v 5: Jeehell A320, Skalarki... MSFS w FlyByWire A320 mod, VR Reverb G2 Link to comment Share on other sites More sharing options...
Stephen Odgaard Posted January 22, 2017 at 09:13 PM Author Posted January 22, 2017 at 09:13 PM The above is infact the problem - selection of a key that was not constantly on. By pressing the "Set new PTT" a number of times i managed to get it to scan for other switches which were not pressed and subsequently select the correct. Looks nice v 2 /Stephen BR Stephen Slot Odgaard VATSCA C3 Member since 2004 P3D v 5: Jeehell A320, Skalarki... MSFS w FlyByWire A320 mod, VR Reverb G2 Link to comment Share on other sites More sharing options...
Ross Carlson Posted January 22, 2017 at 11:20 PM Posted January 22, 2017 at 11:20 PM When you first click the button to set a new PTT, vPilot scans all devices and notes which ones are already pressed. It then ignores those and watches for state changes on the others. Are you saying you have a joystick button that is constantly changing state even when you aren't pressing it? Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Stephen Odgaard Posted January 24, 2017 at 05:51 AM Author Posted January 24, 2017 at 05:51 AM Dont think so- it seem to catch switches which are in the on- state... They were both on my Thurstmaster Warthog HOTAS Throttle. But after third or fourth attempt it disregarded them... /Stephen BR Stephen Slot Odgaard VATSCA C3 Member since 2004 P3D v 5: Jeehell A320, Skalarki... MSFS w FlyByWire A320 mod, VR Reverb G2 Link to comment Share on other sites More sharing options...
Recommended Posts