Duncan White Posted November 22, 2018 at 12:10 AM Posted November 22, 2018 at 12:10 AM (edited) On VATSIM I am being told to expect vectors, expect this approach or expect this runway. While on the face of it this might appear helpful isn't it really just a indication of what the controller intentions are for your aircraft ? ie completely different to receiving a formal clearance or instruction. Should I be reading back these expectations ? See article below on "the unexpected results of the expect clearance technique". https://asrs.arc.nasa.gov/publications/directline/dl4_expect.htm What is your advice / opinion ? Edited November 22, 2018 at 05:56 AM by Guest Link to comment Share on other sites More sharing options...
Board of Governors Don Desfosse Posted November 22, 2018 at 01:06 AM Board of Governors Posted November 22, 2018 at 01:06 AM It should be helpful. Knowing what to expect can help you plan for it. In advance. Which, planning for something and being ready for it in advance should help you, ATC, and the overall safety and efficiency of the system. Just be aware of what's expect and what's been cleared and/or published, and you won't fall into the traps that those other folks fell into. I treat those reports like news -- they wouldn't be news if they weren't relatively rare. For every one mistake that's highlighted in an article like that, it's done correctly thousands of times. That said, we can and should all learn from others' mistakes so we don't repeat them. Don Desfosse Vice President, Operations Link to comment Share on other sites More sharing options...
Markus Vitzethum Posted November 22, 2018 at 11:45 AM Posted November 22, 2018 at 11:45 AM Hi Duncan, as long as it applies to runways or specific approaches only ... just think of it that, as a pilot, it helps you to set up your aircraft for landing properly, plan your descent and do your approach briefing. All these things are items that yon don't want to do when entering the terminal area, or being handled over to the approach controller, e.g. don't plan to fiddle with your FMC when below 10.000' when things get busy. In any case, early runway [Mod - Happy Thoughts]ignments on approach are always helpful to me. The topics addressed in the ASRS reports rather focus on items concerning your flight path (altitude, headings, entering runways) - this is indeed something that can be become safety critical in case of misunderstandings. Markus Link to comment Share on other sites More sharing options...
Eoin Motherway 1315348 Posted November 23, 2018 at 03:29 AM Posted November 23, 2018 at 03:29 AM expect verb regard (something) as likely to happen. I always take "Expect..." with a grain of salt. Doesn't mean things won't change last minute. C1 Controller /O Pacific Oceanic Endorsement BICC_FSS (Iceland Radio) Endorsement Link to comment Share on other sites More sharing options...
Markus Vitzethum Posted November 23, 2018 at 09:05 AM Posted November 23, 2018 at 09:05 AM > Doesn't mean things won't change last minute. Exactly. I witnessed this once while on the jumpseat of a Saab 2000 airline flight into EDDN. We were already vectored onto the downwind (for the ILS28, night time, only few aircraft in the vicinity) approach when ATC came back to the pilots with "Sorry, change of plans, ILS10 is now active, due to wind change"). So, left turn to heading (roughly) 320° towards the FAF ILS10, and rebrief for the ILS10 approach while at 5000'. Happens once in a while. Markus Link to comment Share on other sites More sharing options...
Trevor Hannant Posted November 23, 2018 at 10:31 AM Posted November 23, 2018 at 10:31 AM On VATSIM I am being told to expect vectors, expect this approach or expect this runway. While on the face of it this might appear helpful isn't it really just a indication of what the controller intentions are for your aircraft ? ie completely different to receiving a formal clearance or instruction. Should I be reading back these expectations ? If I receive the "expect vectors for an ILS approach runway xx", the first thing I do is ensure my AP Heading bug is set to the heading I'm currently on and that, if manual input is required, the ILS frequency is set correctly. That way, I'm not scrambling last minute to turn a dial I've forgotten about potentially hours earlier. The "expect" is there to help you get setup and ready early - you won't want to get to the start of the STAR, hear a command to turn and not be prepared. Bear in mind that most arrivals won't follow a STAR and/or Transition in full when controllers are active. Trevor Hannant Link to comment Share on other sites More sharing options...
Board of Governors Simon Kelsey Posted November 23, 2018 at 11:17 AM Board of Governors Posted November 23, 2018 at 11:17 AM And to answer the question about reading back -- no, as it is not an instruction/clearance you there is no requirement to read back in full, an acknowledgement (i.e. "Roger") is sufficient. Vice President, Pilot Training Link to comment Share on other sites More sharing options...
Kirk Christie Posted November 24, 2018 at 08:19 AM Posted November 24, 2018 at 08:19 AM In terms of Australia. Expect items do not need to be read back. However all runway [Mod - Happy Thoughts]ignments need to be read back. If you ever hear a controller say EXPECT VECTORS ILS APPROACH 34L, that is wrong, it is RUNWAY 34L, EXPECT VECTORS FOR THE ILS APPROACH All the pilot has to read back is RUNWAY 34L For what its worth, I have omitted EXPECT XXXX from my read backs and have been told I am required to read that back in some countries, like the USA. Further more, there are only a few clearances Airways Clearance Cleared to enter/leave controlled airspace Cleared to take off/land Everything else is an instruction, and should not have the world Cleared used in them, like Cleared push, Cleared to taxi. Kirk Christie - VATPAC C3 VATPAC Undercover ATC Agent Worldflight Perth 737-800 Crew Member Link to comment Share on other sites More sharing options...
Martin Loxbo Posted November 26, 2018 at 02:00 AM Posted November 26, 2018 at 02:00 AM On VATSIM I am being told to expect vectors, expect this approach or expect this runway. While on the face of it this might appear helpful isn't it really just a indication of what the controller intentions are for your aircraft ? It's funny you put it this way because in Sweden there is a local phraseology; the word "intention" is used instead of "expect", for example "intention vectors for ILS approach" or "intention visual approach". It means just the same as "expect" though, it's just a different way of saying what is the controller's intention. And as has been pointed out already, there is no specific requirement to read back this information. Martin Loxbo Director Sweden FIR VATSIM Scandinavia Link to comment Share on other sites More sharing options...
Andreas Fuchs Posted November 26, 2018 at 11:05 AM Posted November 26, 2018 at 11:05 AM Hmmm, Martin, I flew to Bromma this year or last year and was told to "expect ILS approach runway 30" which I replied to with "roger". The lady then repeated the instruction and I repeated my readback: "roger". She then insisted that I read back the information... And now? Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to comment Share on other sites More sharing options...
Martin Loxbo Posted November 26, 2018 at 11:36 AM Posted November 26, 2018 at 11:36 AM Well, as we all know (right? ) runway in use and type of approach are mandatory readback items. What I meant was there is no specific requirement to read back whatever the controller tells you to expect, such as "expect vectors via right downwind". Slight thread drift, but did you get to enjoy the comfy chairs and free ice cream in the Grafair bizjet terminal? Martin Loxbo Director Sweden FIR VATSIM Scandinavia Link to comment Share on other sites More sharing options...
Andreas Fuchs Posted November 26, 2018 at 11:42 AM Posted November 26, 2018 at 11:42 AM I know, I know, but we had already reported "information BLABLA copied", which implies we were aware of the runway and type of approach in use. I hate to duplicate information. The parrot, the piano and the ice-cream are the main reasons why we fly to Bromma!!! Unfortunately the blond girl from reception was stolen by a fellow pilot and taken to Malmö, a couple of years ago. Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to comment Share on other sites More sharing options...
Martin Loxbo Posted November 26, 2018 at 11:54 AM Posted November 26, 2018 at 11:54 AM Haha so the parrot is still there! Actually I've only visited the terminal once, 11 years ago now. A friend who's a fellow VATSIMmer and pilot was doing some internship there and I remember we flew out in a PA-28. This was back in the day when landing at ESSB didn't cost a fortune. Times are different now... Martin Loxbo Director Sweden FIR VATSIM Scandinavia Link to comment Share on other sites More sharing options...
Andreas Fuchs Posted November 26, 2018 at 12:04 PM Posted November 26, 2018 at 12:04 PM Not much has changed since then, still one of the top 3 FBOs in all of Europe. Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to comment Share on other sites More sharing options...
Kirk Christie Posted November 27, 2018 at 02:15 AM Posted November 27, 2018 at 02:15 AM Reading back Approach type is not really relevant, because you can be cleared for a Visual and use the ILS if you desire. Kirk Christie - VATPAC C3 VATPAC Undercover ATC Agent Worldflight Perth 737-800 Crew Member Link to comment Share on other sites More sharing options...
George Leonard 1000605 Posted November 27, 2018 at 09:38 AM Posted November 27, 2018 at 09:38 AM Hi Duncan, you have a point, though "expect" is officially ICAO phraseology for, exactly what the word means, so plan for it. But it can also be confusing, as you would have experienced with me first hand, so I know, and I say this with the utmost respect to others as in the real world it is the same, that in future ATC need to explicitly cancel the STAR/SID, though you have filed it or setup the FMC to do so. As not all pilots are able to fly SID`s/STARS effectively, mainly due to different simulators, Euroscope will echo conflict alarms, in terms of its set departure and arrival database. So here is my take...overhead the STAR, ATC will say "November 58 Charlie Papa, Standard Arrival is cancelled, maintain current heading, descend xxxx ft" This should then explicitly be accepted by the pilot that he will now not "expect" a vectored ILS, but knows he will be vectored to the ILS. George J Leonard ACCSAF Events Link to comment Share on other sites More sharing options...
Martin Loxbo Posted November 27, 2018 at 01:02 PM Posted November 27, 2018 at 01:02 PM Reading back Approach type is not really relevant, because you can be cleared for a Visual and use the ILS if you desire. You may not think it's relevant, but it's still a requirement. In your example you would still be legally flying the visual approach. If you choose to use the ILS as a backup for situational awareness (which is a good idea), from an ATC perspective you're still flying the visual. If you're not happy with the visual, simply request the ILS. Martin Loxbo Director Sweden FIR VATSIM Scandinavia Link to comment Share on other sites More sharing options...
Steven Perry Posted November 29, 2018 at 03:40 AM Posted November 29, 2018 at 03:40 AM No one seems to have mentioned the official reason "expect..." is issued in the FAA world. Even the NASA article linked by Duncan in the original only makes a tangential reference to it. A controller gives EXPECT instructions for when communications are lost (perhaps... a disgruntled employee starts a fire in the ATC facility.) Cleared KABC to KXYZ via DEF, maintain 5000, expect FL350 10 minutes after departure, sq 1234. When you depart, lose your radios at wheels up, and immediately fly into IMC... you can now continue all the way to KXYZ at 5000 for 10 minutes, then climb FL350. If ATC had omitted the "expect FL350" then you would be stuck at 5,000, [Mod - Happy Thoughts]uming there's no higher minimum altitude (e.g. airway MEA). Similarly, when entering the terminal environment, controllers might issue a vector with the stated reason for the vector being an approach, or issue "expect ILS Rwy 36". Now if you lose communication, you know what to do and ATC will have a reasonable idea of what to expect from the pilot. Lost comms happens very rarely, so the practical everyday reason is to let the pilots plan ahead a little. But it's that one time when you do lose communication that makes it all worth it. So it's not pointless. And I do habitually read it back to give the controller a chance to catch an error and also to cover my butt. Steven Perry VATSIM Supervisor Link to comment Share on other sites More sharing options...
Andreas Fuchs Posted November 29, 2018 at 09:49 AM Posted November 29, 2018 at 09:49 AM Cleared KABC to KXYZ via DEF, maintain 5000, expect FL350 10 minutes after departure, sq 1234. When you depart, lose your radios at wheels up, and immediately fly into IMC... you can now continue all the way to KXYZ at 5000 for 10 minutes, then climb FL350. If ATC had omitted the "expect FL350" then you would be stuck at 5,000, [Mod - Happy Thoughts]uming there's no higher minimum altitude (e.g. airway MEA). Again, this is the US. Under "normal rules" you just climb to your cruise altitude according to ICAO Lost Comms Procedures: http://www.code7700.com/lost_communications.htm Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to comment Share on other sites More sharing options...
Joshua Jenkins Posted November 29, 2018 at 11:42 PM Posted November 29, 2018 at 11:42 PM Again, this is the US. Under "normal rules" you just climb to your cruise altitude according to ICAO Lost Comms Procedures: http://www.code7700.com/lost_communications.htm To add on to this, in Canada (or at least for the CZVR FIR), we don't even bother with giving the pilots a temporary altitude in their initial clearance (in 90% of cases) because we expect them to follow the procedure on the SID charts which outline specific procedures for what to do in case of a radio failure. Josh Josh Jenkins CZVR I1 controller Link to comment Share on other sites More sharing options...
Recommended Posts