Erich Berner 834484 Posted April 15, 2019 at 07:39 AM Posted April 15, 2019 at 07:39 AM Hi Ross Newly installed P3D v.4.5, vPilot, fresh W10 64 installation Have used VATSIM and VPilot for years and have recently run into this issue where my PTT [Mod - Happy Thoughts]ignment not longer allows me to transmit. Newly installed W10, P3D and vPilot. I can [Mod - Happy Thoughts]ign the button in the vPilot's settings/audio, but when I press the button in sim the Tx doesn't light and no-one can hear me. I've checked everything else which I consider obvious. As it's a new W10 install, I will check whether I have allowed access to the microphone during the windows setup process. But apart from this, I'm not sure why this should happen. Link to comment Share on other sites More sharing options...
Kenneth Haught Posted April 15, 2019 at 07:50 AM Posted April 15, 2019 at 07:50 AM One common issue that brings this up is 1) do you run P3D as an admin, and 2) is vPilot similarly set to run as an admin on launch (or is launched as an admin manually). Also, and this may be unnecessary to ask but are you tuned to an active ATC frequency? Voice is only permitted to tx on ATC frequencies as the controller "creates" the voice room during our connection process. So no ATC, no voice as it stands currently. Anchorage Deputy Air Traffic Manager VATSIM Senior Supervisor (Team 1) Have a question or concern? Email me at [email protected]. Link to comment Share on other sites More sharing options...
Erich Berner 834484 Posted April 15, 2019 at 01:26 PM Author Posted April 15, 2019 at 01:26 PM One common issue that brings this up is 1) do you run P3D as an admin, and 2) is vPilot similarly set to run as an admin on launch (or is launched as an admin manually). Also, and this may be unnecessary to ask but are you tuned to an active ATC frequency? Voice is only permitted to tx on ATC frequencies as the controller "creates" the voice room during our connection process. So no ATC, no voice as it stands currently. Both programs run as Admin and the correct active frequencies are tuned. The MIC button on the radio stack is also 'on' Link to comment Share on other sites More sharing options...
Ross Carlson Posted April 15, 2019 at 01:53 PM Posted April 15, 2019 at 01:53 PM Type ".debug" into the vPilot window, and then press PTT and see if it shows debug messages in the debug window when you press and release PTT. Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Alex Amorianos Posted April 15, 2019 at 03:24 PM Posted April 15, 2019 at 03:24 PM Try also to go to Settings>Privacy>Microphone At the top of the window, check that it says “Microphone access for this device is on.” If Windows says microphone access is off, click the “Change” button and set it to “On.” If access is off, Windows and all applications on your system can’t access audio from your microphone. Alex Link to comment Share on other sites More sharing options...
Ross Carlson Posted April 15, 2019 at 03:29 PM Posted April 15, 2019 at 03:29 PM If the TX doesn't light up, I don't think it's a microphone problem. Seems it's not recognizing the PTT or he's not connected to a voice room. Erich, let me know about the debug output. Also, does the frequency show in a light blue color at the top right corner of the vPilot window? Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Kenneth Haught Posted April 15, 2019 at 10:20 PM Posted April 15, 2019 at 10:20 PM Actually following up on what Ross put...what are you trying to use as your PTT? If I recall there are some keys that won't recognize as PTT due to conflicts in the SIM/computer. Anchorage Deputy Air Traffic Manager VATSIM Senior Supervisor (Team 1) Have a question or concern? Email me at [email protected]. Link to comment Share on other sites More sharing options...
Erich Berner 834484 Posted April 17, 2019 at 01:41 PM Author Posted April 17, 2019 at 01:41 PM If the TX doesn't light up, I don't think it's a microphone problem. Seems it's not recognizing the PTT or he's not connected to a voice room. Erich, let me know about the debug output. Also, does the frequency show in a light blue color at the top right corner of the vPilot window? Hi Ross, I'll try the debug tonight. I've been away for the past two days. The active freq is in light blue font yes. Also, when I switch to an active freq, the active freq audio chime sounds. When I switch to an inactive freq, the inactive chime sounds. The microphone is definitely set to 'on' in the Windows settings, and apps have access to it. I have a PFC Yoke and the PTT is set to Button 7 on the yoke, as it has been for the past 5 years. I've tried re-[Mod - Happy Thoughts]igning the PTT to a keyboard key, but get the same nil result. Also tried uninstalling/re-installing vPilot. cheers erich Link to comment Share on other sites More sharing options...
Erich Berner 834484 Posted April 22, 2019 at 07:46 AM Author Posted April 22, 2019 at 07:46 AM Update: The .debug command somehow corrected the situation and I can now [Mod - Happy Thoughts]ign the PTT to whatever I want. Thanks for your help Ross. Cheers erich Link to comment Share on other sites More sharing options...
Board of Governors Don Desfosse Posted April 22, 2019 at 12:42 PM Board of Governors Posted April 22, 2019 at 12:42 PM Ross -- sounds like a new commercial... .debug ... Getting the bugs out! Since 2014. Unfortunately, folks, the following features have not yet been programmed: .deboss .dewife Don Desfosse Vice President, Operations Link to comment Share on other sites More sharing options...
Ross Carlson Posted April 22, 2019 at 02:23 PM Posted April 22, 2019 at 02:23 PM I can [Mod - Happy Thoughts]ure you the .debug command did not fix the problem. Something else changed that you aren't aware of. Developer: vPilot, VRC, vSTARS, vERAM, VAT-Spy Senior Controller, Boston Virtual ARTCC Link to comment Share on other sites More sharing options...
Erich Berner 834484 Posted April 23, 2019 at 09:02 AM Author Posted April 23, 2019 at 09:02 AM I may have done something inadvertently, but certainly not deliberately to affect a change. Not sure what, but anyway...back in business. Link to comment Share on other sites More sharing options...
Recommended Posts