Maciej Wiejak-Sochacki 114 Posted September 26, 2019 at 09:57 AM Posted September 26, 2019 at 09:57 AM Hello! I've been troubleshooting the problem for 3 days, reading a lot topics, especially here. I don't remember when last I was writing about a problem in the internet But now it happens. Ok, so I always was using SquawkBox, and it worked ok, but since it's not supported any more, I installed vPilot. First on FSX, and then od P3D. On both on them the problem is the same. I can conncect to the VATSIM, I see ATC and the traffic also. When I tune to the ATC, frequency sometimes go blue and I can talk to them, they can also hear me 5 on 5. But sometimes the frequency remains white, and they don't hear me. When I press PTT button, TX box lights up on a blue colour, but I hear a buzzer; I can talk to them on a private chat, and also text them on the main ATC channel. But can't use voice. So I was testing it like this. I set up the aircraft (few of the AC, also the default ones), switch the master, avionics, batteries, APU, radio etc. And in this configuration I was logging to some airports in the same time. 75% of the time I could contact the ATC. The other 25% I couldn't. That's what I've done: - Allow access to vPilot private and public network in Firewall - Make a rule in Firewall inboud and outbound Firewall settings - Make an exception to vPilot in Avira - Forward port 3290 in my router - Run vPilot and Prepar3d in administrator mode - Microphone use in P3D and vPilot is set to ON (windows) - Connecting to different servers (however, I can't connect on Germany server I dont know why) Help please Regards Link to comment Share on other sites More sharing options...
Kirk Christie Posted September 27, 2019 at 07:03 AM Posted September 27, 2019 at 07:03 AM Is the controller you are trying to connect to in the list on the left hand side? Kirk Christie - VATPAC C3 VATPAC Undercover ATC Agent Worldflight Perth 737-800 Crew Member Link to comment Share on other sites More sharing options...
Maciej Wiejak-Sochacki 114 Posted September 27, 2019 at 09:57 AM Author Posted September 27, 2019 at 09:57 AM Yes, if I have luck and everything works fine, it works like it schould. I see all the ATC on the LH side, I can use voice, frequency is on blue color etc. When I have bad luck, the only difference is that the frequency is on white color, and I hear the buzzer when pressing PTT (but TX lights on blue). It seems that something is blocking voice channel, not the connection itself, but not all of the time. It depends on the ATC, but I have no idea what voice channel/ ports ATC are using. Further more, I don't know exactly how could I check it. Link to comment Share on other sites More sharing options...
Recommended Posts