Justin Shannon Posted October 18, 2019 at 02:08 PM Posted October 18, 2019 at 02:08 PM Version 1.1.0.5 of xPilot is now available for download from the web site, or via the automatic update utility built into the pilot client. The following items were fixed in this version: Fix for aircraft sunken below the ground As a result of this patch, you may see aircraft that are slightly hovering above the ground. Please be patience while I continue to work out the kinks in the ground clamping code. Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Joachim Clemens Posted October 18, 2019 at 06:37 PM Posted October 18, 2019 at 06:37 PM I just did my first flight with xPilot. First of all thank you very much for the work you spent on it, you did a great job! Unfortunately, I'm getting mixed results regarding the vertical placement of the CSL aircraft. Some of them look reasonably good, while other are sunk into the ground. Here a two screenshots: https://www.dropbox.com/s/3ay16h01ut1ax64/A320%20-%202019-10-18%2019.23.12.jpg?dl=0 https://www.dropbox.com/s/ks74smwape1729n/A320%20-%202019-10-18%2019.23.17.jpg?dl=0 The American and the British Airways planes in the first screenshot and the nearer Ryanair plane in the second screenshot are VATSIM aircraft. All others are static aircraft of the scenery. I'm using version 1.1.0.5 of xPilot in combination with the Bluebell CSL pack. I tried both with and without the IVAO offsets, but the result was the same case. Please let me know if you need additional information or if I can help in another way. Link to comment Share on other sites More sharing options...
Justin Shannon Posted October 18, 2019 at 06:46 PM Author Posted October 18, 2019 at 06:46 PM I just did my first flight with xPilot. First of all thank you very much for the work you spent on it, you did a great job! Unfortunately, I'm getting mixed results regarding the vertical placement of the CSL aircraft. Some of them look reasonably good, while other are sunk into the ground. Here a two screenshots: https://www.dropbox.com/s/3ay16h01ut1ax64/A320%20-%202019-10-18%2019.23.12.jpg?dl=0 https://www.dropbox.com/s/ks74smwape1729n/A320%20-%202019-10-18%2019.23.17.jpg?dl=0 The American and the British Airways planes in the first screenshot and the nearer Ryanair plane in the second screenshot are VATSIM aircraft. All others are static aircraft of the scenery. I'm using version 1.1.0.5 of xPilot in combination with the Bluebell CSL pack. I tried both with and without the IVAO offsets, but the result was the same case. Please let me know if you need additional information or if I can help in another way. Please see the last paragraph on the first post in this topic... Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Robert Shearman Jr Posted October 19, 2019 at 01:24 AM Posted October 19, 2019 at 01:24 AM Hey, Justin -- just had X-Plane CTD for the first time in about a year. xPilot was the last app that made an entry in Log.txt although I know that doesn't necessarily mean it was the cause. (xPilot was actually still running when X-Plane crashed.) I'm posting in case you get other reports of similar issues. Otherwise I'll chalk it up to one of those fluke things unless it happens again. Logs attached below. No response needed unless you need further info. https://drive.google.com/open?id=1AVYao4HkZ8rsufQbO_tDWU9y3U97H8Y_ Cheers, -R. Link to comment Share on other sites More sharing options...
Peter Mooney Posted October 19, 2019 at 06:10 AM Posted October 19, 2019 at 06:10 AM Hey, Justin -- just had X-Plane CTD for the first time in about a year. xPilot was the last app that made an entry in Log.txt although I know that doesn't necessarily mean it was the cause. (xPilot was actually still running when X-Plane crashed.) I'm posting in case you get other reports of similar issues. I also had xPlane randomly quit last night when using xPilot for the first time. https://drive.google.com/open?id=1SzUd0CjwhFxy40PpBCiSKjlQXV1EjQex Hope this is of some use! Link to comment Share on other sites More sharing options...
Luca Schaer 1366932 Posted October 19, 2019 at 07:52 AM Posted October 19, 2019 at 07:52 AM Hey Justin Just wondering what was changed in since v. 1.1.0.2 because it worked like a gem there, now it is totally messed up, at certain airports aircraft are hovering 5-10m above ground. Is there anyway to download an older version until this is fixed? Not does it only look bad, but it is also really difficult to follow instructions if people dont see you or visversa. Regards Link to comment Share on other sites More sharing options...
Joachim Clemens Posted October 19, 2019 at 09:10 AM Posted October 19, 2019 at 09:10 AM Please see the last paragraph on the first post in this topic... I got this, but it says one may see planes hovering above the ground. In my case they are sunk into the ground, which was stated to be fixed. Anyway, I'll just wait for the next update Link to comment Share on other sites More sharing options...
Bernhard Harb Posted October 19, 2019 at 12:05 PM Posted October 19, 2019 at 12:05 PM I can confirm that 1.1.0.2 was working flawlessly but with 1.1.0.5 I have hoovering planes and worse, I cannot start a flight because I get a CTD after a few minutes. My log is already here in the forum, Bernhard. Bernhard Harb VACC Austria Member Link to comment Share on other sites More sharing options...
Tommaso Baliani Posted October 19, 2019 at 02:41 PM Posted October 19, 2019 at 02:41 PM I can confirm that 1.1.0.2 was working flawlessly but with 1.1.0.5 I have hoovering planes and worse, I cannot start a flight because I get a CTD after a few minutes. My log is already here in the forum, Bernhard. I got FPS loss too. Link to comment Share on other sites More sharing options...
Tommaso Baliani Posted October 19, 2019 at 02:45 PM Posted October 19, 2019 at 02:45 PM Meanwhile, can we get a link to download the 1.1.0.4 or previous version? so I can fly on VATSIM, since I can't find links for the previous versions. Thanks Link to comment Share on other sites More sharing options...
steven PAPAI 1317636 Posted October 19, 2019 at 05:05 PM Posted October 19, 2019 at 05:05 PM Yeah anyway I can revert back to 1.1.0.4 that worked fine for me. Aircraft were not floating or 2 feet under the ground this update just made it worse. Stone Link to comment Share on other sites More sharing options...
Filip Nowak Posted October 19, 2019 at 06:30 PM Posted October 19, 2019 at 06:30 PM Anybody can share older 1.1.0.4 version? Has only 1.1.0.1 left :/ 1.1.0.5 is too crashy. Link to comment Share on other sites More sharing options...
Tommaso Baliani Posted October 19, 2019 at 07:34 PM Posted October 19, 2019 at 07:34 PM Yeah anyway I can revert back to 1.1.0.4 that worked fine for me. Aircraft were not floating or 2 feet under the ground this update just made it worse. How do you get back to previous versions? Link to comment Share on other sites More sharing options...
Filip Nowak Posted October 19, 2019 at 07:35 PM Posted October 19, 2019 at 07:35 PM Yeah anyway I can revert back to 1.1.0.4 that worked fine for me. Aircraft were not floating or 2 feet under the ground this update just made it worse. How do you get back to previous versions? Probably he downloaded 1.1.0.4 and stored it... Just like I stored 1.1.0.1 and can share if you want. Link to comment Share on other sites More sharing options...
Tommaso Baliani Posted October 19, 2019 at 07:40 PM Posted October 19, 2019 at 07:40 PM Yeah anyway I can revert back to 1.1.0.4 that worked fine for me. Aircraft were not floating or 2 feet under the ground this update just made it worse. How do you get back to previous versions? Probably he downloaded 1.1.0.4 and stored it... Just like I stored 1.1.0.1 and can share if you want. PLS give me the 1.1.0.1 I need it I'm gonna fly my oceanic for the first time and don't want to do everything by text Link to comment Share on other sites More sharing options...
steven PAPAI 1317636 Posted October 19, 2019 at 08:14 PM Posted October 19, 2019 at 08:14 PM If anyone has 1.1.0.4 and can share would be greatly appreciated! Stone Link to comment Share on other sites More sharing options...
Filip Nowak Posted October 19, 2019 at 08:49 PM Posted October 19, 2019 at 08:49 PM There you go ... version 1.1.0.1 https://www.dropbox.com/s/8hofjpbfeajn2yv/xPilot-Setup-1.1.0.1.exe?dl=0 Link to comment Share on other sites More sharing options...
Robert Shearman Jr Posted October 19, 2019 at 09:31 PM Posted October 19, 2019 at 09:31 PM Or just upgrade to 1.1.0.6, which was just released and should hopefully eliminate the issues with crashing X-Plane to desktop. Cheers, -R. Link to comment Share on other sites More sharing options...
Justin Shannon Posted October 19, 2019 at 09:32 PM Author Posted October 19, 2019 at 09:32 PM Version 1.1.0.6 has been released which should address the crashing issue. Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Recommended Posts