Wayne Gary Posted November 1, 2019 at 10:57 PM Posted November 1, 2019 at 10:57 PM First commands .com1 and .com2 work fine in setting the frequencies. But, the .com command seems to have no function at all. No matter what .com I issue i always hear both radios. .com both never turns both off. Issuing .com 1 or .com 2 never changes hearing both radios. Nothing stops me from hearing both radios. This is on FF767. I haven't tested in on other aircraft. wayne Link to comment Share on other sites More sharing options...
Robert Shearman Jr Posted November 2, 2019 at 03:44 AM Posted November 2, 2019 at 03:44 AM In other aircraft I can confirm it works fine -- tested in several. I don't have any FlightFactor planes though and I suspect there are still some inconsistencies with the internal variables they use to report radio status. Cheers, -R. Link to comment Share on other sites More sharing options...
Justin Shannon Posted November 3, 2019 at 04:36 PM Posted November 3, 2019 at 04:36 PM Wayne, I've made some changes in v1.1.3.0 to accommodate aircraft models that don't use the standard datarefs. The .rx command allows you to force which com radio(s) can receive audio. .rx com# (on|off) For example: .rx com1 on Similarly, the .tx command allows you to force which com radio can transmit. .tx com# For example: .tx com2 Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Recommended Posts