Prithvisagar Shivaraman 12 Posted November 9, 2019 at 12:41 AM Posted November 9, 2019 at 12:41 AM I fired up my Zibo Mod today (3.37) and noticed that my COM radios weren't syncing up with XPilot correctly. If I have COM1 Mic, and both COM1 and COM2 listening on my radio stack, xpilot only recognizes TX/RX on COM1. If I have the F/O radio stack transmit on VHF2, then it seems to be able to RX on xpilot. However, if I want to transmit on VHF2, it simply won't let me. Is there something I'm missing, or is this a bug? Prithvi Shivaraman (YJ) Facility Engineer New York ARTCC Link to comment Share on other sites More sharing options...
Justin Shannon Posted November 9, 2019 at 01:20 AM Posted November 9, 2019 at 01:20 AM Unfortunately, Zibo is one of many aircraft models that do not properly use the standard datarefs. As a workaround, you can use the .tx and .rx commands. .rx com# on|off Toggles receiving on the specified com radio. For example: .rx com1 on .tx com# Enables the COM1 or COM2 radio for transmit. For example: .tx com2 Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Prithvisagar Shivaraman 12 Posted November 9, 2019 at 02:25 AM Author Posted November 9, 2019 at 02:25 AM Yeah I had a hunch that was the case. I was using .tx and .rx as a workaround. Prithvi Shivaraman (YJ) Facility Engineer New York ARTCC Link to comment Share on other sites More sharing options...
Recommended Posts