ben lux 1462151 Posted December 20, 2019 at 09:10 AM Posted December 20, 2019 at 09:10 AM hi, ive tried for the last few weeks now to connect and fly with the 747ssg but seems like vatsim and xpilot cant work with the plane, i really dont know what to do i bought the plane for vatsim and now i cant solve it out thanks. Link to comment Share on other sites More sharing options...
Nestor Perez Posted December 20, 2019 at 02:16 PM Posted December 20, 2019 at 02:16 PM Have a look at the posts in the Pilot Software -> xPilot section Me. Link to comment Share on other sites More sharing options...
ben lux 1462151 Posted December 20, 2019 at 02:41 PM Author Posted December 20, 2019 at 02:41 PM Found nothing there Link to comment Share on other sites More sharing options...
Nestor Perez Posted December 20, 2019 at 02:47 PM Posted December 20, 2019 at 02:47 PM viewtopic.php?f=157&t=80371#p539717 Me. Link to comment Share on other sites More sharing options...
ben lux 1462151 Posted December 20, 2019 at 02:51 PM Author Posted December 20, 2019 at 02:51 PM Nope,thats not the issue, my coms are synced and i can text message the controllers for example, but can’t hear any of them, not the Atis and not them self’s, When i switch to zibo every thing works fine Link to comment Share on other sites More sharing options...
Nestor Perez Posted December 20, 2019 at 02:55 PM Posted December 20, 2019 at 02:55 PM Yes, then run the commands from the link I sent, as they toggle VOICE communications and are not only for Zibo Me. Link to comment Share on other sites More sharing options...
ben lux 1462151 Posted December 20, 2019 at 03:09 PM Author Posted December 20, 2019 at 03:09 PM How do i run them? Link to comment Share on other sites More sharing options...
Nestor Perez Posted December 20, 2019 at 03:13 PM Posted December 20, 2019 at 03:13 PM In the xPilot textbox (where you normally type to other controllers/pilots) Me. Link to comment Share on other sites More sharing options...
ben lux 1462151 Posted December 20, 2019 at 03:15 PM Author Posted December 20, 2019 at 03:15 PM K,just to copy and paste them there?! Link to comment Share on other sites More sharing options...
Nestor Perez Posted December 20, 2019 at 03:20 PM Posted December 20, 2019 at 03:20 PM Yes, copy-paste is fine. Run these to enable radio1: (Receive) .rx com1 on (Transmit) .tx com1 on And these if you want/need to enable radio2: (Receive) .rx com2 on (Transmit) .tx com2 on Me. Link to comment Share on other sites More sharing options...
ben lux 1462151 Posted December 20, 2019 at 03:21 PM Author Posted December 20, 2019 at 03:21 PM allright i'll try it, thanks!! Link to comment Share on other sites More sharing options...
Recommended Posts