Giovanni Tarar 2 Posted April 15, 2020 Share Posted April 15, 2020 Hello guys! I've just updated to the latest v3.2.1.24 beta, and it seems to have an issue. Whenever I close Euroscope (either after a session or if I just started it to check something) it does the usual asking if I want to save this and that, but after I click Save or Cancel on the last window, it hangs and after a couple of minutes Windows tells me the the program is not responding, and crashes. Has anyone of you experienced this issue as well? Best regards! Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Alexander Nakopoulos 10 Posted April 15, 2020 Share Posted April 15, 2020 it does the same to me as well. 1 Link to post Share on other sites
Carlo Bollini 1 Posted April 15, 2020 Share Posted April 15, 2020 Can confirm this happening to me as well 1 Link to post Share on other sites
Alex Amorianos 2 Posted April 15, 2020 Share Posted April 15, 2020 +1 1 Alex Link to post Share on other sites
Thimo Koolen 2 Posted April 15, 2020 Share Posted April 15, 2020 Can confirm this happening to some users in the Dutch VACC. Downgrading to previous beta for now. 1 ACCNL5 (Assistant Training Director) - Dutch VACC Link to post Share on other sites
Giovanni Tarar 2 Posted April 16, 2020 Author Share Posted April 16, 2020 7 hours ago, Thimo Koolen said: Can confirm this happening to some users in the Dutch VACC. Downgrading to previous beta for now. Thanks a lot. Will follow the advice. Hopefully it will be fixed soon Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Jonas Kuster 4 Posted April 16, 2020 Share Posted April 16, 2020 Most likely a plugin you use which is not compatible. Try the default profile and everything works fine. Jonas Kuster Leader Operation - vACC Switzerland | www.vacc.ch Link to post Share on other sites
Giovanni Tarar 2 Posted April 17, 2020 Author Share Posted April 17, 2020 (edited) 13 hours ago, Jonas Kuster said: Most likely a plugin you use which is not compatible. Try the default profile and everything works fine. I did some investigations and tried multiple combinations of plug-ins. I found that the one that is causing Euroscope to hang on exit is vSMR... Edited April 17, 2020 by Giovanni Tarar Updated cause of the issue (not AFV Bridge, but vSMR) Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Chriss Klosowski 88 Posted April 17, 2020 Share Posted April 17, 2020 Actually this isn't a problem with the plugins. I have been using the beta for a while now with all my regular plugins. It says in the change log that if there are any issue make sure to download the latest redistribute package from Microsoft. https://aka.ms/vs/16/release/vc_redist.x86.exe Change log: https://www.euroscope.hu/wp/2020/04/12/3-2-1-24/ CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Jonas Kuster 4 Posted April 17, 2020 Share Posted April 17, 2020 So you have the vSMR plugin working with r24? Because on my system it looks also as this plugin is not (yet) compatible. Jonas Kuster Leader Operation - vACC Switzerland | www.vacc.ch Link to post Share on other sites
Chriss Klosowski 88 Posted April 17, 2020 Share Posted April 17, 2020 Currently with the latest beta, mentoring a student with vSMR (Not the nightly build btw). CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Giovanni Tarar 2 Posted April 18, 2020 Author Share Posted April 18, 2020 21 hours ago, Chriss Klosowski said: Actually this isn't a problem with the plugins. I have been using the beta for a while now with all my regular plugins. It says in the change log that if there are any issue make sure to download the latest redistribute package from Microsoft. https://aka.ms/vs/16/release/vc_redist.x86.exe Change log: https://www.euroscope.hu/wp/2020/04/12/3-2-1-24/ I have just updated the ms redist but no luck...Euroscope still hangs on closure Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Jonas Kuster 4 Posted April 18, 2020 Share Posted April 18, 2020 17 hours ago, Chriss Klosowski said: Currently with the latest beta, mentoring a student with vSMR (Not the nightly build btw). The crash I observed is only when you close ES after the session. 1 Jonas Kuster Leader Operation - vACC Switzerland | www.vacc.ch Link to post Share on other sites
Giovanni Tarar 2 Posted April 18, 2020 Author Share Posted April 18, 2020 7 hours ago, Jonas Kuster said: The crash I observed is only when you close ES after the session. Yes. From start to the end everything it's fine. But after clicking on the X to close, and after having confirmed all the save/cancel windows, it hangs until you give it an imput with the mouse and then crashes. At least it saves the settings before crashing Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Phil Aldred 0 Posted April 20, 2020 Share Posted April 20, 2020 Im also getting this problem, just tried unloading vSMR plugin and its now closing properly. Link to post Share on other sites
Giovanni Tarar 2 Posted April 20, 2020 Author Share Posted April 20, 2020 2 hours ago, Phil Aldred said: Im also getting this problem, just tried unloading vSMR plugin and its now closing properly. Did the same, but sometimes I have to use it anyway because it's really useful, and I'm an S1 so ground is my only job... Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
David Thurstan 0 Posted July 21, 2020 Share Posted July 21, 2020 Hi all, I notice this hasn't been posted to in ages, but for completeness sake... This issue is due to the order of the plugins. (In my case the UKController Plugin and vSMR) Any plugin that does the same sort of thing as the UKController plugin but for another country, say, will probably exhibit. It is partially a Euroscope bug too - or so I'm lead to understand. It is present in ES beta (r23 - r25) as far as I know. Steps to take: 1. Make vSMR the very last plugin to be loaded by using the up/down buttons to change the order of the plugins (or just unload it and re load it so it appears as last in the list.) 2. Exit ES - it will still hang at this point so click on the screen and select to end the program in the dialogue box that comes up. 3. Re-Start ES. The problem should have gone. The latest nightly-build of vSMR has a fix in it that was committed only a few days ago. Installing that nightly build will also fix the problem and the order no longer matters. Hope that helps anyone else... Cheers, Dave Link to post Share on other sites
Giovanni Tarar 2 Posted September 19, 2020 Author Share Posted September 19, 2020 On 7/21/2020 at 7:21 PM, David Thurstan said: Hi all, I notice this hasn't been posted to in ages, but for completeness sake... This issue is due to the order of the plugins. (In my case the UKController Plugin and vSMR) Any plugin that does the same sort of thing as the UKController plugin but for another country, say, will probably exhibit. It is partially a Euroscope bug too - or so I'm lead to understand. It is present in ES beta (r23 - r25) as far as I know. Steps to take: 1. Make vSMR the very last plugin to be loaded by using the up/down buttons to change the order of the plugins (or just unload it and re load it so it appears as last in the list.) 2. Exit ES - it will still hang at this point so click on the screen and select to end the program in the dialogue box that comes up. 3. Re-Start ES. The problem should have gone. The latest nightly-build of vSMR has a fix in it that was committed only a few days ago. Installing that nightly build will also fix the problem and the order no longer matters. Hope that helps anyone else... Cheers, Dave I can confirm that. The new nightly build of vSMR has fixed all the hang-related issues, but hopefully a fix for the plug-ins management is coming with the next ES beta 🙂 Giovanni D. Tarar VATITA --- P3 - S2 FAA CPL+IR Single&MultiEngine Land Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now