Marc Sieffert Posted January 27, 2021 at 06:15 PM Posted January 27, 2021 at 06:15 PM (edited) Hi, I just up graded x Pilot to 1.3.36. Normally according to the change log the new functionality should be like this: Changelog 1.3.36 - 01/23/2021 Remove mutex locks from airplane management class Nearby ATC Window mouse click events updated. Single-click will request the controller info/text ATIS. Double-click will tune the COM1 frequency to the selected controller/station. But when I double click on the frequency I am getting also ATIS (see video link below) and only when having clicked several times on several frequencies I am eventually getting the frequency tuned into Com1 of my radio. I am using X Plane 11.51 with one of the latest Zibo 3.45.10. This seems to be a bug on X Pilot side. Could you please check and let us know. https://drive.google.com/file/d/1OYX8sNIHO8EF3v2LNXnbRmEwVHgeJ2Gd/view?usp=sharing Thanks a lot!! Edited January 27, 2021 at 08:01 PM by Marc Sieffert Link to comment Share on other sites More sharing options...
Justin Shannon Posted January 27, 2021 at 08:19 PM Posted January 27, 2021 at 08:19 PM Hi Marc, Does this only happen when using the Zibo? What about a default aircraft, like the Cessna 172? Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Justin Shannon Posted January 28, 2021 at 04:25 AM Posted January 28, 2021 at 04:25 AM I just had time to test this myself and I am unable to reproduce this behavior. A single-click requests the ATIS and double-click tunes the COM1 frequency as intended. Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Marc Sieffert Posted January 28, 2021 at 10:13 AM Author Posted January 28, 2021 at 10:13 AM (edited) Hi Justin, I tested again also this morning and if I start with a frequency which is not tuned in yet on my COM1and double click on the new frequency I want to tune in then: - If I double click first on the frequency that I want to tune in I am getting first ATIS but if I then double click on another frequency this other frequency is tuned in and for all further new frequency double clicking works fine. So the pb is only the very first step when I am clicking on a new frequency not tuned in yet. https://drive.google.com/file/d/1NJcvq8vQpD85p8NqTFHmnGlOnO2HbPug/view?usp=sharing - If I am double clicking continously on the same frequency that I want to tune in am getting continously ATIS https://drive.google.com/file/d/1XST5RgQe97crJGc87kggvg3BJpfptLUy/view?usp=sharing So its not a big pb we just have to double click on two different frequencies to get it work but perhaps you could test this again on your side. Please let me know which Zibo version you are using... THE STATEMENTS ABOVE ARE WITH ZIBO 3.45.10 BUT I TESTED ALSO THE DEFAULT 737 OF X PLANE HERE THE SITUATION IS WORSE AS YOU CAN SEE ON THE VIDEO BELOW, EVEN WHEN SELECTING A SECOND FREQUENCY IT DOES NOT WORK, ONLY WHEN HAVING SELECTED A FEW ONES IT EVENTUALLY WORKS... https://drive.google.com/file/d/11ef8tebl1xfa2T420NIi8VXYbQfmTops/view?usp=sharing Thanks a lot to check this again!! Edited January 28, 2021 at 07:04 PM by Marc Sieffert Link to comment Share on other sites More sharing options...
Justin Shannon Posted January 29, 2021 at 01:37 AM Posted January 29, 2021 at 01:37 AM Hi Marc, Please check your private messages. Thanks. Controller (C3), Los Angeles ARTCC Developer: xPilot, vATIS Link to comment Share on other sites More sharing options...
Tim Simpson Posted May 16, 2021 at 02:48 PM Posted May 16, 2021 at 02:48 PM I was flying on VATSIM last night using xpilot, and Zibo 3_49_0. Double clicking only shows the controller information for me. I have to right click the controller, then select the third item down in the menu that pops up "tune comm 1" to tune the radio. Wish double click would just tune comm 1. Link to comment Share on other sites More sharing options...
Recommended Posts