Adam Lovic Posted August 11, 2021 at 03:15 PM Posted August 11, 2021 at 03:15 PM Hello guys i have this problem --- When i set freq that i need into stby freq and change it with arrow to active freq after 10 seconds they both became the same so i cant communicate with ATC did you had that? if yes some ideas please i was resolving that with moderator but he dont know too what that can be. Link to comment Share on other sites More sharing options...
Keith Scott Posted August 11, 2021 at 10:16 PM Posted August 11, 2021 at 10:16 PM I have this same issue. I normally have to use Com2 to be able to communicate. I've been using the C172 in FS2020 Link to comment Share on other sites More sharing options...
Adam Lovic Posted August 12, 2021 at 10:16 AM Author Posted August 12, 2021 at 10:16 AM I have it in all planes that im using i was trying COM2 also sometimes it was the same but i will try it. Thanks Link to comment Share on other sites More sharing options...
Robert Shearman Jr Posted August 12, 2021 at 09:09 PM Posted August 12, 2021 at 09:09 PM Make sure that in the "Assistance" menu you have the "Delegate ATC to First Officer" OFF. If it is on, the pretend, built-in AI First Officer will be changing radio frequencies all day trying to talk to the pretend, built-in AI ATC -- and each frequency change will override what you have dialed in so you can communicate with the appropriate VATSIM controller. Cheers, -R. Link to comment Share on other sites More sharing options...
Adam Lovic Posted August 13, 2021 at 04:27 PM Author Posted August 13, 2021 at 04:27 PM Thank you very much im not home now but tomorow i will try it. Link to comment Share on other sites More sharing options...
Recommended Posts