Everton Machado 822064 Posted April 9, 2008 at 08:26 PM Posted April 9, 2008 at 08:26 PM Hello people! I´m trying to develop a scenario file for ATC trainning. When I start the simulation, the acft start flying on heading 090. Is it normal? Is there any way to the acft follow a pre-determined route? Or I did something wrong? Below, the scenario file contents and a Curitiba TMA screenshot. CONTROLLER:1:SBCT_APP:129.55 ILS15:S25.31.21.706:W049.10.54.290:152 AIRPORT_ALT:2988 @N:TAM3003:4001:1:S24.47.09.293:W048.30.07.151:23000:0:0:0 $FPTAM3003:*A:I:A320:415:SBSP:2100:2105:280:SBCT:00:50:03:50:SBGR:EQPT/W:UA310 $ROUTE:TAM3000:LUCAS CASY:0:5:15:CASY:15000 Link to comment Share on other sites More sharing options...
Gergely Csernak Posted April 10, 2008 at 08:03 AM Posted April 10, 2008 at 08:03 AM Everton, No, it is not normal. When you start simulating all planes should by default heading to the first point defined in the $ROUTE section. What does EuroScope say about the plane status? When you select the plane in the list on the top you should have a description how the plane is simulated. What is written there? Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Everton Machado 822064 Posted April 10, 2008 at 07:30 PM Author Posted April 10, 2008 at 07:30 PM Gergely, I added one more acft, as below: @N:VRN8201:3416:1:S26.26.04.848:W049.39.05.400:22000:0:0:0 $FPVRN8201:*A:B737:450:SBPA:2045:2051:390:SBCT:01:00:03:50:SBFL:EQPT/W $ROUTE:VRN8201:ABEAR:FAMA:0:2:5:FAMA:19000 When I open the simulation, Euroscope says that TAM3003 is on heading 090 and VRN8201 is following route. But when I hit the "Resume" button to start the sim, both acfts begin flying on heading 090... Link to comment Share on other sites More sharing options...
Everton Machado 822064 Posted April 10, 2008 at 07:36 PM Author Posted April 10, 2008 at 07:36 PM Gergely, Forget my post! Look at this: @N:TAM3003:4001:1:S24.47.09.293:W048.30.07.151:23000:0:0:0 $FPTAM3003:*A:I:A320:415:SBSP:2100:2105:280:SBCT:00:50:03:50:SBGR:EQPT/W:UA310 $ROUTE:TAM3000:LUCAS CASY:0:5:15:CASY:15000 @N:VRN8201:3416:1:S26.26.04.848:W049.39.05.400:22000:0:0:0 $FPVRN8201:*A:B737:450:SBPA:2045:2051:390:SBCT:01:00:03:50:SBFL:EQPT/W $ROUTE:VRN8201:ABEAR:FAMA:0:2:5:FAMA:19000 Soooory... I was really sleeping when I did it... Thanks for the help... Link to comment Share on other sites More sharing options...
Gergely Csernak Posted April 11, 2008 at 09:25 AM Posted April 11, 2008 at 09:25 AM Everton, And it is really hard to find such typo errors. Gergely. EuroScope developer Link to comment Share on other sites More sharing options...
Victor Naumov 1013374 Posted March 11, 2009 at 10:50 AM Posted March 11, 2009 at 10:50 AM Hello to everyone. I have a problem with aircraft's heading on the ground. I'm using the scenario creator "Aircraft Simulation Editor" and set headings for aircraft on the ground there, but starting the simulator, I have 090 degrees heading for each aircraft on the ground. Everything ok with a/c in the air. Please advise me, how can I make grounded a/c heading another than 090. Best Regards! Link to comment Share on other sites More sharing options...
Todor Atanasov 878664 Posted March 13, 2009 at 05:04 AM Posted March 13, 2009 at 05:04 AM Can you send us your scenery file: bul_stuff(at)abv.bg support(at)euroscope.hu EuroScope BETA Tester/Board of Designers Link to comment Share on other sites More sharing options...
Recommended Posts