Andreas Fuchs 208 Posted August 20, 2017 Share Posted August 20, 2017 Hi Nick! I just had a chance to test the updated version of euroNAT and it works super! Thanks SO MUCH for taking your time to fix it. Really appreciated! Johnny, I am using nNAS for position reports, have you tried that already? https://www.virtualnorwegian.net/oceanic/ocatool/ Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Johnny Coughlan 7 Posted August 21, 2017 Share Posted August 21, 2017 Hi Nick! I just had a chance to test the updated version of euroNAT and it works super! Thanks SO MUCH for taking your time to fix it. Really appreciated! Johnny, I am using nNAS for position reports, have you tried that already? https://www.virtualnorwegian.net/oceanic/ocatool/ I use vNAS too Andreas, I just find it can be unforgiving if an error is made and it not being 100% secure to outside 'manipulation' if someone wanted to cause trouble. I was just wondering if someone had made a plugin for use in Euroscope . Guess I'll have to wait . Link to post Share on other sites
Andreas Fuchs 208 Posted August 21, 2017 Share Posted August 21, 2017 Only registered users can login and modify data in vNAS. The main variable is pilots having their clocks set to the wrong time Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Luke Brown 1 Posted October 6, 2017 Share Posted October 6, 2017 Hi Guys, just been signed off for Shanwick, It seems EuroNAT no longer works due to the source URL not loading anymore https://www.notams.jcs.mil/common/nat.html Any chance of getting the plugin updated to get it to load? Network Supervisor | C1 | P1 VATSIM UK Link to post Share on other sites
Andreas Fuchs 208 Posted October 7, 2017 Share Posted October 7, 2017 Hi Luke, Nick has corrected this, please download his new version of the plugin. He has posted the URL on this thread, just a few posts up. Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Tony Koch 0 Posted June 10, 2019 Share Posted June 10, 2019 Running v1.3b1 of the euroNAT plugin results in error: an error occurred in the secure channel support error: couldn’t open https://pilotweb.nas.faa.gov/common/nat.html I am running Euroscope v3.2 in Windows 7 Ultimate with Service Pack 1 under VMware Fusion v11.1.0 on a new iMac. There is no problem accessing this page using Firefox in the same environment, nor do I experience any other difficulties with network access. The plugin is loading. I can access its options. (Euroscope continues to be unable to access the sector providers file at euroscope.hu.) Anyone know how to resolve this? Link to post Share on other sites
Nick Botica 4 Posted June 10, 2019 Share Posted June 10, 2019 Hi Tony, Thanks, I’ll check this out tonight. Nick Link to post Share on other sites
Nick Botica 4 Posted June 11, 2019 Share Posted June 11, 2019 error: an error occurred in the secure channel support error: couldn’t open https://pilotweb.nas.faa.gov/common/nat.html I am running Euroscope v3.2 in Windows 7 Ultimate with Service Pack 1 under VMware Fusion v11.1.0 on a new iMac. Hi Tony, Have you been able to run this in the past? - In Windows 7? - In a VM? It's fetching the data ok for me. But it could have something to do with the VM... Edit: Looks like it has something to do with TLS. Start Menu > Search for 'Internet Options' > Advanced Tab > Scroll down to Security > Tick 'Use TLS 1.2' If it was already ticked, untick it, click Apply. Then re-tick it, apply and restart EuroScope. Nick Link to post Share on other sites
Tony Koch 0 Posted June 11, 2019 Share Posted June 11, 2019 Absolute genius! It was using TLS 1.0 and worked immediately when I added TLS 1.2. Very much appreciated...Tony Link to post Share on other sites
Nick Botica 4 Posted June 11, 2019 Share Posted June 11, 2019 Absolute genius! It was using TLS 1.0 and worked immediately when I added TLS 1.2. Very much appreciated...Tony Cool mate, no worries. N Link to post Share on other sites
Chriss Klosowski 91 Posted October 20, 2019 Share Posted October 20, 2019 Hello, Gander & Shanwick Facilities Engineer here. The plugin seems to no longer get NAT Track information. When I try to access the FAA page I get a "Denied" error..? Could the page now have been restricted. Waiting for your answer. CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Andreas Fuchs 208 Posted October 20, 2019 Share Posted October 20, 2019 https://pilotweb.nas.faa.gov/common/nat.html Should work. Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Nick Botica 4 Posted October 25, 2019 Share Posted October 25, 2019 Hello, Gander & Shanwick Facilities Engineer here. The plugin seems to no longer get NAT Track information. When I try to access the FAA page I get a "Denied" error..? Could the page now have been restricted. Waiting for your answer. Hi there, Still working ok for me today. The plugin's allowed to draw on your radar screen still? Are there any messages from 'EuroNAT' down in the bottom left corner of euroscope? Nick Link to post Share on other sites
Chriss Klosowski 91 Posted October 29, 2019 Share Posted October 29, 2019 Hello, Gander & Shanwick Facilities Engineer here. The plugin seems to no longer get NAT Track information. When I try to access the FAA page I get a "Denied" error..? Could the page now have been restricted. Waiting for your answer. Hi there, Still working ok for me today. The plugin's allowed to draw on your radar screen still? Are there any messages from 'EuroNAT' down in the bottom left corner of euroscope? Nick I get errors such as: euroNAT access denied to the URL... Its allowed to draw on the screen. I try to open the link on my browser and its blocked...? Could it be blocked in the country such as the U.A.E? CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Nick Botica 4 Posted October 31, 2019 Share Posted October 31, 2019 I get errors such as: euroNAT access denied to the URL... Its allowed to draw on the screen. I try to open the link on my browser and its blocked...? Could it be blocked in the country such as the U.A.E? If you can’t get to this page in your normal browser (eg chrome, Firefox) then you’re probably out of luck. Do you get an error message in the browser? https://pilotweb.nas.faa.gov/common/nat.html Link to post Share on other sites
Chriss Klosowski 91 Posted October 31, 2019 Share Posted October 31, 2019 Access Denied You don't have permission to access "http://pilotweb.nas.faa.gov/common/nat.html" on this server. Reference #18.c6bbc217.1572509662.77497bb CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Andreas Fuchs 208 Posted October 31, 2019 Share Posted October 31, 2019 Maybe try to replace http with https. I'm away from home and cannot test it myself. Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Richard Quigley 17 Posted February 29, 2020 Share Posted February 29, 2020 Euronat message: NAT Data not in expected format, https://pilotweb.nas.faa.gov/common/nat.html The link takes you to a search page. with the URL of: https://notams.aim.faa.gov/notamSearch/nsapp.html#/ Norwegian Virtual at https://www.oceanic.andersmoen.com/?logon=success still appears to be accessing the NAT as does Moncton/Gander (CZQM/QX) FIR at http://czqm.ca/Oceanic.aspx Quig, C3, P1, VATPAC, CZQM (inact), CZQX (ret). 4200+ hrs of "Chaos, Panic & Disorder in your virtual skies!" Link to post Share on other sites
Andrew Ogden 28 Posted February 29, 2020 Share Posted February 29, 2020 Euronat message: NAT Data not in expected format, https://pilotweb.nas.faa.gov/common/nat.html The link takes you to a search page. with the URL of: https://notams.aim.faa.gov/notamSearch/nsapp.html#/ Norwegian Virtual at https://www.oceanic.andersmoen.com/?logon=success still appears to be accessing the NAT as does Moncton/Gander (CZQM/QX) FIR at http://czqm.ca/Oceanic.aspx Nic is aware and is updating the NAT p[Mod - Happy Thoughts]r with the new link as we speak Andrew Ogden | I3 Gander Oceanic OCA Chief VATSIM Web Developer Visit us: https://ganderoceanic.com Contact: [email protected] Link to post Share on other sites
Andreas Fuchs 208 Posted February 29, 2020 Share Posted February 29, 2020 They have changed the website, damn it. Try this: https://notams.aim.faa.gov/nat.html Cheers, Andreas Member of VATSIM GermanyMy real flying on InstagramMy Twitch streams of VATSIM flights and ATC Link to post Share on other sites
Andrew Ogden 28 Posted February 29, 2020 Share Posted February 29, 2020 They have changed the website, damn it. Try this: https://notams.aim.faa.gov/nat.html At least the format hasn't changed *phew* Andrew Ogden | I3 Gander Oceanic OCA Chief VATSIM Web Developer Visit us: https://ganderoceanic.com Contact: [email protected] Link to post Share on other sites
Richard Quigley 17 Posted March 1, 2020 Share Posted March 1, 2020 Nic is aware and is updating the NAT p[Mod - Happy Thoughts]r with the new link as we speak Nic is a magic man and we thank him! Quig, C3, P1, VATPAC, CZQM (inact), CZQX (ret). 4200+ hrs of "Chaos, Panic & Disorder in your virtual skies!" Link to post Share on other sites
Jagard Strong 0 Posted March 30, 2020 Share Posted March 30, 2020 How does one change the site in the .dll file? Getting this error: "NAT DATA not in expected format, https://pilotweb.nas.faa.gov/common/nat.html" It does draw the current nat track on the screen, but unable to display concord nats or expired (previous day) East/westbound tracks Jagard Link to post Share on other sites
Phillip Speer 0 Posted March 30, 2020 Share Posted March 30, 2020 Hi Jagard, Download the latest Beta 1.3 beta 2 from https://github.com/nickbotica/euroNAT/releases and replace the files. Phillip VATSIM UK Divisional Instructor Link to post Share on other sites
Chriss Klosowski 91 Posted April 1, 2020 Share Posted April 1, 2020 The Oceanic Sectorfiles will be updated with the new NAT plugin version soon. CHRISS KLOSOWSKI Division Director [email protected] www.vatsim.me Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now