Andrea Mazzoni Posted June 16, 2021 at 09:33 PM Posted June 16, 2021 at 09:33 PM Hello VATSIM users, I had experience during last session a strange issue on ES. I found a lot of flights which was appeared costaintely on SQUAWK IDENT permanently active also if these pilot wasn't instructed to do it or if they had activated the IDENT option without instruction. Someone could tell me which could be the reason of this issues? It wasn't significantly annoying, but it could be if my sector could start to be very crowded. Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Morten Jelle Posted June 21, 2021 at 10:50 AM Posted June 21, 2021 at 10:50 AM Sounds more like a pilot client issue than a Euroscope issue. I haven't experienced anything like that at least. Morten Jelle VATSIM Network Supervisor, Team Lead - Supervisor Team 1 Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted July 13, 2021 at 11:29 AM Author Posted July 13, 2021 at 11:29 AM On 6/21/2021 at 12:50 PM, Morten Jelle said: Sounds more like a pilot client issue than a Euroscope issue. I haven't experienced anything like that at least. Weird to hear. Because it happen several time, if you look on my Twitch you can see this issue. Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Morten Jelle Posted July 17, 2021 at 04:28 PM Posted July 17, 2021 at 04:28 PM On 7/13/2021 at 1:29 PM, Andrea Mazzoni said: if you look on my Twitch you can see this issue. For that, I need a link. 😉 Morten Jelle VATSIM Network Supervisor, Team Lead - Supervisor Team 1 Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted July 18, 2021 at 03:06 PM Author Posted July 18, 2021 at 03:06 PM 22 hours ago, Morten Jelle said: For that, I need a link. 😉 I forgot to add on signature. twitch.tv/italianalien21 Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Morten Jelle Posted July 19, 2021 at 11:33 AM Posted July 19, 2021 at 11:33 AM A link to a specific spot would have been preferred. You want me to look through all your videos to see it? Morten Jelle VATSIM Network Supervisor, Team Lead - Supervisor Team 1 Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted October 7, 2021 at 09:25 AM Author Posted October 7, 2021 at 09:25 AM I forgot to reply to this post on July because few days after my last post, I started the holidays. This is basically the issue. I see a lot of flight like they are doing the IDENT procedure on the radar, but I never ask to them to do it. VIDEOCLIP If someone will see the clip and will be able to solve the issue, thanks in advance! 👽 Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Bernardo Reis Posted October 7, 2021 at 09:54 AM Posted October 7, 2021 at 09:54 AM Can you show us the Symbology Settings for the aircraft correlated symbols? Link to comment Share on other sites More sharing options...
Pablo Maciel Posted October 7, 2021 at 10:17 AM Posted October 7, 2021 at 10:17 AM Seeing the video, I could not realize which tags are in squawk ident. Maybe this is a sector file problem or the .ESE file. Are you the only one who has experienced this issue or this is a common issue? Also check the symbology settings if all settings are ok. Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted October 7, 2021 at 06:09 PM Author Posted October 7, 2021 at 06:09 PM 8 hours ago, Bernardo Reis said: Can you show us the Symbology Settings for the aircraft correlated symbols? 7 hours ago, Pablo Maciel said: Seeing the video, I could not realize which tags are in squawk ident. Maybe this is a sector file problem or the .ESE file. Are you the only one who has experienced this issue or this is a common issue? Also check the symbology settings if all settings are ok. So TRA538 and the DLH closer to LIMM-EDMM Border are basically the normal setting for a correlated with SSR and PSR. All others visible with the same dot but with an additional cross are the traffic which appear like they have sent the IDENT. Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Pablo Maciel Posted October 7, 2021 at 07:28 PM Posted October 7, 2021 at 07:28 PM I do not know why it is happening. I suggest you to contact your vACC staff in order to sort this problem out. I do not know if this is a sector file problem or just a wrong setting. Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted October 8, 2021 at 08:15 AM Author Posted October 8, 2021 at 08:15 AM (edited) 12 hours ago, Pablo Maciel said: I do not know why it is happening. I suggest you to contact your vACC staff in order to sort this problem out. I do not know if this is a sector file problem or just a wrong setting. I will try with default sectofile. My sectorfile use some additional features which aren't applied on default sector of my vACC. I will write here it it will work well with the default sct. Edited October 8, 2021 at 08:16 AM by Andrea Mazzoni Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Pablo Maciel Posted October 8, 2021 at 09:05 AM Posted October 8, 2021 at 09:05 AM 48 minutes ago, Andrea Mazzoni said: I will try with default sectofile. My sectorfile use some additional features which aren't applied on default sector of my vACC. I will write here it it will work well with the default sct. Perfect Andrea, let us know if it works. Arrivederci. Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted November 3, 2021 at 06:52 PM Author Posted November 3, 2021 at 06:52 PM On 10/8/2021 at 11:05 AM, Pablo Maciel said: Perfect Andrea, let us know if it works. Arrivederci. Hello Pablo, I just made now a test. Seems that with default sectorfile it work without problem. Is weird. I will try to check all single steps that I made to modify it. Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Bernardo Reis Posted November 3, 2021 at 07:21 PM Posted November 3, 2021 at 07:21 PM @Andrea MazzoniMaybe it is an issue in your Symbology settings. Can you show us on symbology settings the different symbols for the radar tracks? Link to comment Share on other sites More sharing options...
Pablo Maciel Posted November 4, 2021 at 09:21 AM Posted November 4, 2021 at 09:21 AM (edited) 14 hours ago, Andrea Mazzoni said: Hello Pablo, I just made now a test. Seems that with default sectorfile it work without problem. Is weird. I will try to check all single steps that I made to modify it. I am glad to hear that Andrea! As Bernardo said, check your symbology setting, and your general settings in order to find out what is causing this problem. Let us know any news. Best regards. Edited November 4, 2021 at 09:47 AM by Pablo Maciel Link to comment Share on other sites More sharing options...
Hongye Rudi Zhang Posted November 5, 2021 at 08:44 PM Posted November 5, 2021 at 08:44 PM If possible to make the tag flash for a few seconds after IDENT, it will be more convenient for ATC to find aircraft. Especially in heavy traffic time! Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted November 6, 2021 at 11:16 AM Author Posted November 6, 2021 at 11:16 AM Photo error I think that it could be this the issue! On 10/7/2021 at 11:54 AM, Bernardo Reis said: Can you show us the Symbology Settings for the aircraft correlated symbols? Probably the former developer of this label, not anymore an active user (or still registered) has made this mistake. Is absurd because CDS2000 computer use the cross just for IDENT impulse! Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Andrea Mazzoni Posted November 6, 2021 at 03:06 PM Author Posted November 6, 2021 at 03:06 PM The problem could be called as solved. It was definetely that setting which was made with wrong symbol with my personal system. Thanks to everyone! Sometimes things get complicated. ATC on VATSIM as Milano Radar (LIMM_N_CTR) Twitch channel https://www.twitch.tv/italianalien21 Link to comment Share on other sites More sharing options...
Recommended Posts