Stephan Boerner 945550 0 Posted January 13, 2010 Share Posted January 13, 2010 Hm, never tried to use pro radar mode for ground, so I'll have to test it. But give me a few days, I'll receive my new PC today and will have to set everything up first. Stephan Boerner VATEUD - ATC Training Director EuroScope Board of Designers | GVCCS Beta Tester EuroScope Quick Start Guide Link to post Share on other sites
Todor Atanasov 878664 0 Posted January 13, 2010 Share Posted January 13, 2010 Are you using Professional or Professional with S-mode and without radar? I tested today and it is working quite well. If using Professional mode only check that you have design a symbol for ground aircraft. EuroScope BETA Tester/Board of Designers Link to post Share on other sites
Kevin Kan 0 Posted January 14, 2010 Author Share Posted January 14, 2010 Yes there is a symbol. It works when I use Professional Ground with mode S and Professional Ground without radar. It does not work with Professional mode only. Maybe it was intentionally designed that way? Like my GOAT? Too bad, it's mine. My airline flying at the speed of normal Link to post Share on other sites
Raphael Strobel 1104722 0 Posted January 14, 2010 Share Posted January 14, 2010 Sorry for delay, I will just post my solution I found: In Fact, the two Simulation Modes under "Display" and "General Settings" must be the same, but the manual configuration using ES didn't work, so I changed the ASR and TXT file myself. Make sure that the Items m_CorrelationMode:0 and SIMULATION_MODE:0 have the same value. As I said it doesn't work sometimes when changing it in Euroscope, so just give it a try manually lg Raphael Link to post Share on other sites
Jonas Eberle 1068951 0 Posted January 16, 2010 Share Posted January 16, 2010 I checked for what Raphael suggested and can confirm: I am using "Easy" in .asr and General settings. here is a picture that shows the leader lines on the ground: Please notice, only landed aircraft are showing incorrect (EMPIRE1 + GEW1441): * leader lines * Altitude (600ft instead of 400ft) * Vertical Speed * Vertical Speed indicator * Two letter ground speed This is reproducable on all inbound aircraft. I have to check if this might have to do with my ground Monitor being a secondary instance of EuroScope - will try that on the primary as well. PS: Did I already say I LOVE the colors in the tag and in the lists? Link to post Share on other sites
Gergely Csernak 3 Posted January 16, 2010 Share Posted January 16, 2010 Jonas, Please check that you can reproduce it with a playback session too. If so then send me a log along with your settings file. Thx. Gergely. Gergely. EuroScope developer Link to post Share on other sites
Jonas Eberle 1068951 0 Posted January 18, 2010 Share Posted January 18, 2010 I can reproduce in Replay: Logfiles (move forward 6 min to see one approaching plane taxiing to the gate) (one for prim and sec instance included - works in both) Interesting: the leader line on the ground appears if the aircraft reaches 0 kts groundspeed *exactly* (at the gate, not earlier). The wrong altitude, groundspeed and vertical speed indications appear from touchdown on. EDIT: I found an important step to reproduce!!! If I deselect "Simulate radar holes and coverage", it shows correct indications Link to post Share on other sites
Gergely Csernak 3 Posted January 18, 2010 Share Posted January 18, 2010 OK. Then it is the known issue. In 3.1b Easy mode disables radar simulation automatically. Gergely. EuroScope developer Link to post Share on other sites
Eivind Fosse 818131 0 Posted January 18, 2010 Share Posted January 18, 2010 I also have this problem: Picture: http://www.mediafire.com/imageview.php?quickkey=wm3mmmizqiz&thumb=6 The aircraft is parked at the gate on an airport that is about 200 ft above MSL. Eivind Link to post Share on other sites
Jonas Eberle 1068951 0 Posted January 18, 2010 Share Posted January 18, 2010 Thank you, Gergely! You are great! Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now